Airworthiness Directives; Viking Air Limited Airplanes
Requires actions to address the unsafe condition on these products.
[Federal Register Volume 81, Number 91 (Wednesday, May 11, 2016)]
[Rules and Regulations]
[Pages 29125-29127]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-10928]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2016-6628; Directorate Identifier 2016-CE-013-AD;
Amendment 39-18514; AD 2016-10-03]
RIN 2120-AA64
Airworthiness Directives; Viking Air Limited Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
[[Page 29126]]
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for Viking
Air Limited Model DHC-3 airplanes that are modified with the Baron
Short Take Off and Landing (STOL) kit (Supplemental Type Certificate
SA94-114 or SA 00287NY). This AD results from mandatory continuing
airworthiness information (MCAI) issued by the aviation authority of
another country to identify and correct an unsafe condition on an
aviation product. The MCAI describes the unsafe condition as a center
of gravity that is too far aft contributing to a stall during takeoff
and loss of control during other phases of flight. We are issuing this
AD to require actions to address the unsafe condition on these
products.
DATES: This AD is effective May 31, 2016.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in the AD as of May 31, 2016.
We must receive comments on this AD by June 27, 2016.
ADDRESSES: You may send comments by any of the following methods:
Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments.
Fax: (202) 493-2251.
Mail: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue SE., Washington, DC 20590.
Hand Delivery: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue SE., Washington, DC 20590, between 9 a.m. and 5 p.m.,
Monday through Friday, except Federal holidays.
For service information identified in this AD, contact Stolairus
Aviation Inc., (formerly known as AOG Air Support, Inc.), 6095 Airport
Way, Kelowna, British Columbia V1V 1S1; phone: (250) 491-7511; fax:
(25) 491-7522; Internet: http://www.stolairus.com. You may view this
referenced service information at the FAA, Small Airplane Directorate,
901 Locust, Kansas City, Missouri 64106. For information on the
availability of this material at the FAA, call (816) 329-4148. It is
also available on the Internet at http://www.regulations.gov by
searching for and locating Docket No. FAA-2016-6628.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-
6628; or in person at the Docket Management Facility between 9 a.m. and
5 p.m., Monday through Friday, except Federal holidays. The AD docket
contains this AD, the regulatory evaluation, any comments received, and
other information. The street address for the Docket Office (telephone
(800) 647-5527) is in the ADDRESSES section. Comments will be available
in the AD docket shortly after receipt.
FOR FURTHER INFORMATION CONTACT: Aziz Ahmed, Aerospace Engineer, FAA,
New York Aircraft Certification Office (ACO), 1600 Stewart Avenue,
Suite 410, Westbury, New York 11590; telephone: (516) 287-7329; fax:
(516) 794-5531; email: [email protected].
SUPPLEMENTARY INFORMATION:
Discussion
Transport Canada, which is the aviation authority for Canada, has
issued AD No. CF-2016-05, dated January 25, 2016 (referred to after
this as ``the MCAI''), to correct an unsafe condition for Viking Air
Limited Model DHC-3 airplanes that are modified with the Baron Short
Take Off and Landing (STOL) kit (Supplemental Type Certificate SA94-114
or SA 00287NY). The MCAI states (paraphrased):
The investigation of a fatal crash of a turbo-propeller powered
DHC-3 airplane modified with a Baron STOL kit determined that the
probable cause was a rearward shift in the center of gravity, which
resulted in a stall during takeoff. A center of gravity that is too far
aft can contribute to a stall during takeoff and may result in loss of
control during other phases of flight.
You may examine the MCAI on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-
6628.
Related Service Information Under 1 CFR Part 51
Stolarious Aviation Inc. has issued Flight Manual Supplement #4, de
Havilland DHC-3 Otter, Baron STOL Kit Installation, DOT STC # SA 94-
114/FAA STC # SA 00287NY, Revision 3, dated May 22, 2015. The service
information consists of a revision to the Baron STOL kit installation
flight manual supplement (FMS). This service information is reasonably
available because the interested parties have access to it through
their normal course of business or by the means identified in the
ADDRESSES section of the AD.
FAA's Determination and Requirements of the AD
This product has been approved by the aviation authority of another
country, and is approved for operation in the United States. Pursuant
to our bilateral agreement with this State of Design Authority, they
have notified us of the unsafe condition described in the MCAI and
service information referenced above. We are issuing this AD because we
evaluated all information provided by the State of Design Authority and
determined the unsafe condition exists and is likely to exist or
develop on other products of the same type design.
FAA's Determination of the Effective Date
An unsafe condition exists that requires the immediate adoption of
this AD. The FAA has found that the risk to the flying public justifies
waiving notice and comment prior to adoption of this rule because a
center of gravity that is too far aft could lead to a stall during
takeoff and loss of control during other phases of flight. Therefore,
we determined that notice and opportunity for public comment before
issuing this AD are impracticable and that good cause exists for making
this amendment effective in fewer than 30 days.
Comments Invited
This AD is a final rule that involves requirements affecting flight
safety, and we did not precede it by notice and opportunity for public
comment. We invite you to send any written relevant data, views, or
arguments about this AD. Send your comments to an address listed under
the ADDRESSES section. Include ``Docket No. FAA-2016-6628; Directorate
Identifier 2016-CE-013-AD'' at the beginning of your comments. We
specifically invite comments on the overall regulatory, economic,
environmental, and energy aspects of this AD. We will consider all
comments received by the closing date and may amend this AD because of
those comments.
We will post all comments we receive, without change, to http://www.regulations.gov, including any personal information you provide. We
will also post a report summarizing each substantive verbal contact we
receive about this AD.
Costs of Compliance
We estimate that this AD will affect 36 products of U.S. registry.
We also estimate that it will take about 1 work-hour per product to
comply with the basic requirements of this AD. The average labor rate
is $85 per work-hour.
[[Page 29127]]
Based on these figures, we estimate the cost of the AD on U.S.
operators to be $3,060, or $85 per product.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's
authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, section 44701: General
requirements.'' Under that section, Congress charges the FAA with
promoting safe flight of civil aircraft in air commerce by prescribing
regulations for practices, methods, and procedures the Administrator
finds necessary for safety in air commerce. This regulation is within
the scope of that authority because it addresses an unsafe condition
that is likely to exist or develop on products identified in this
rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications
under Executive Order 13132. This AD will not have a substantial direct
effect on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979),
(3) Will not affect intrastate aviation in Alaska, and
(4) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new AD:
2016-10-03 Viking Air Limited: Amendment 39-18514 Docket No. FAA-
2016-6628; Directorate Identifier 2016-CE-013-AD.
(a) Effective Date
This airworthiness directive (AD) becomes effective May 31,
2016.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Viking Air Limited Model DHC-3 airplanes, all
serial numbers, that are:
(1) Modified with the Baron Short Take Off and Landing (STOL)
kit (Supplemental Type Certificate SA94-114 or SA 00287NY); and
(2) certificated in any category.
(d) Subject
Air Transport Association of America (ATA) Code 8: Leveling and
Weighing.
(e) Reason
This AD was prompted by mandatory continuing airworthiness
information (MCAI) originated by an aviation authority of another
country to identify and correct an unsafe condition on an aviation
product. The MCAI describes the unsafe condition as an accident
report that indicated that the center of gravity was too far aft and
contributed to a stall during takeoff. We are issuing this AD to
correct the center of gravity and prevent such a stall during
takeoff and loss of control during other phases of flight.
(f) Actions and Compliance
Unless already done, within 30 days after May 31, 2016 (the
effective date of this AD), remove whichever previous revision of
the Otter Baron short take-off and landing (STOL) kit installation
flight manual supplement (FMS) that is currently being used and
incorporate Stolairus Aviation Inc. Flight Manual Supplement #4 for
de Havilland DHC-3 Otter with the Baron STOL Kit Installation,
Revision 3, dated May 22, 2015. This action may be performed by the
owner/operator (pilot) holding at least a private pilot certificate
and must be entered into the aircraft records showing compliance
with this AD in accordance with 14 CFR 43.9 (a)(1)(4) and 14 CFR
91.417(a)(2)(v). The record must be maintained as required by 14 CFR
91.173 or 135.439.
(g) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
Standards Office, FAA, has the authority to approve AMOCs for this
AD, if requested using the procedures found in 14 CFR 39.19. Send
information to ATTN: Aziz Ahmed, Aerospace Engineer, FAA, New York
Aircraft Certification Office (ACO), 1600 Stewart Avenue, Suite 410,
Westbury, New York 11590; telephone: (516) 287-7329; fax: (516) 794-
5531; email: [email protected]. Before using any approved AMOC on
any airplane to which the AMOC applies, notify your appropriate
principal inspector (PI) in the FAA Flight Standards District Office
(FSDO), or lacking a PI, your local FSDO.
(2) Airworthy Product: For any requirement in this AD to obtain
corrective actions from a manufacturer or other source, use these
actions if they are FAA-approved. Corrective actions are considered
FAA-approved if they are approved by the State of Design Authority
(or their delegated agent). You are required to assure the product
is airworthy before it is returned to service.
(h) Related Information
Refer to MCAI Transport Canada AD CF-2016-05, dated January 25,
2016, for related information. You may examine the MCAI on the
Internet at http://www.regulations.gov by searching for and locating
Docket No. FAA-2016-6628.
(i) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless the AD specifies otherwise.
(i) Stolairus Aviation Inc., Flight Manual Supplement #4, de
Havilland DHC-3 Otter, Baron STOL Kit Installation, DOT STC # SA 94-
114/FAA STC # SA 00287 NY, Revision 3, dated May 22, 2015.
(ii) Reserved.
(3) For Stolairus Aviation Inc. service information identified
in this AD, contact Stolairus Aviation Inc. (formerly known as AOG
Air Support, Inc.), 6095 Airport Way, Kelowna, British Columbia V1V
1S1; phone: (250) 491-7511; fax: (25) 491-7522; internet: http://www.stolairus.com.
(4) You may view this service information at the FAA, Small
Airplane Directorate, 901 Locust, Kansas City, Missouri 64106. For
information on the availability of this material at the FAA, call
(816) 329-4148. It is also available on the Internet at http://www.regulations.gov by searching for locating Docket No. FAA-2016-
6628.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Kansas City, Missouri on May 4, 2016.
David R. Showers,
Acting Manager, Small Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 2016-10928 Filed 5-10-16; 8:45 am]
BILLING CODE 4910-13-P
Sources. Section 1 is written by AircraftDirectives from the record below and is a reading aid only. Section 2 is the United States Government's own text, reproduced without edit.
Federal Register: https://www.federalregister.gov/documents/2016/05/11/2016-10928/airworthiness-directives-viking-air-limited-airplanes
Official PDF: https://www.govinfo.gov/content/pkg/FR-2016-05-11/pdf/2016-10928.pdf
Packet generated 2026-08-18 08:57 UTC.
This packet is not an airworthiness determination and not legal or maintenance advice. AircraftDirectives reproduces official records and condenses their wording for easier reading. It does not decide, certify or imply whether any aircraft, engine, appliance or part is airworthy, compliant, affected by this directive, or eligible for return to service. No inspection, approval, or determination of any kind is performed or implied by this document.
Section 1 is a reading aid, not the rule. It is our own plain-language condensation, written to help a reader find the relevant directive quickly. It is NOT a substitute for the regulation, it may omit conditions, exceptions, compliance times, alternative methods of compliance (AMOCs) and applicability limits, and it has no legal force whatsoever. Only the official text governs. Where Section 1 and Section 2 differ in any respect, Section 2 - and the official source it was retrieved from - controls absolutely.
Responsibility remains with the owner/operator. Under 14 CFR §91.403 and §91.417 the owner or operator is responsible for maintaining airworthiness and for required records; under §39.7 no person may operate a product to which an airworthiness directive applies except in accordance with that directive. Determining applicability to a specific serial number and configuration, and performing or supervising any required action, is the responsibility of the owner/operator and appropriately certificated personnel.
Accuracy and currency. Section 2 was retrieved at the time stamped above and is reproduced without edit; Federal Register material is a work of the United States Government. Directives are amended, corrected and superseded over time, and this sheet is a snapshot, not a live record - it does not update after printing. Re-check the official sources before acting on it. This packet is provided without warranty of any kind, express or implied, including fitness for a particular purpose. We do not sell parts and have no commercial interest in any action a directive may require.