Airworthiness Directives; McCauley Propeller Systems Five-Blade Propeller Assemblies
Requires a one- time eddy-current inspection of the propeller hub for cracks, and if necessary, replacing the propeller assembly.
[Federal Register Volume 69, Number 224 (Monday, November 22, 2004)]
[Rules and Regulations]
[Pages 67807-67809]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-25543]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2004-19242; Directorate Identifier 2004-NE-21-AD;
Amendment 39-13871; AD 2004-23-16]
RIN 2120-AA64
Airworthiness Directives; McCauley Propeller Systems Five-Blade
Propeller Assemblies
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
McCauley Propeller Systems propeller assemblies, part numbers (P/Ns)
B5JFR36C1101/114GCA-0, C5JFR36C1102/L114GCA-0, B5JFR36C1103/114HCA-0,
and C5JFR36C1104/L114HCA-0, installed on BAE Systems (Operations)
Limited Jetstream Model 4100 series airplanes. This AD requires a one-
time eddy-current inspection of the propeller hub for cracks, and if
necessary, replacing the propeller assembly. This AD results from three
reports of cracked hubs. We are issuing this AD to detect cracked hubs,
which could cause failure of the propeller hub and loss of control of
the airplane.
DATES: This AD becomes effective December 7, 2004. The Director of the
Federal Register approved the incorporation by reference of certain
publications listed in the regulation as of December 7, 2004.
We must receive any comments on this AD by January 21, 2005.
ADDRESSES: Use one of the following addresses to comment on this AD.
DOT Docket Web site: Go to http://dms.dot.gov and follow
the instructions for sending your comments electronically.
Government-wide rulemaking Web site: Go to http://www.regulations.gov and follow the instructions for sending your
comments electronically.
Mail: Docket Management Facility; U.S. Department of
Transportation, 400 Seventh Street, SW., Nassif Building, Room PL-401,
Washington, DC 20590-0001.
Fax: (202) 493-2251.
Hand Delivery: Room PL-401 on the plaza level of the
Nassif Building, 400 Seventh Street, SW., Washington, DC, between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
Contact McCauley Propeller Systems, P.O. Box 7704, Wichita, KS
67277-7704, U.S.A.; telephone (800) 621-7767, for the service
information identified in this AD.
FOR FURTHER INFORMATION CONTACT: Timothy Smyth, Aerospace Engineer,
Chicago Aircraft Certification Office, FAA, Small Airplane Directorate,
2300 East Devon Avenue, Des Plaines, IL 60018; telephone: (847) 294-
7132; fax: (847) 294-7834.
SUPPLEMENTARY INFORMATION: We have received three reports of cracks in
the hubs of certain McCauley Propeller Systems propeller assemblies. An
operator reported an oil leak at the end of a flight. Investigation
revealed a significant crack in the propeller hub. In addition, the
same operator reported cracks in two other hubs that might be related
to the first report. In both of those reports, the operator inspected
the hub because of reported oil leaks. The operator performed a
voluntary inspection program, and did not find any more cracks. About
30 percent of the remaining fleet has complied with the voluntary
inspection over the past several months. No operator has reported any
more cracked hubs. Although we believe the cracks are caused by
fatigue, we don't know the exact cause. One possibility is that
operating the propeller in the restricted RPM range during ground
operation is contributing to premature failure of the propeller hub.
This condition, if not corrected, could result in failure of the
propeller hub and loss of control of the airplane.
Relevant Service Information
We have reviewed and approved the technical contents of McCauley
Alert Service Bulletin (ASB) No. ASB247A, Revision A, dated August 18,
2004. That ASB describes procedures for removing the propeller from the
airplane, performing an eddy-current inspection, and installing the
propeller after the inspection.
FAA's Determination and Requirements of This AD
The unsafe condition described previously is likely to exist or
develop on other McCauley Propeller Systems propeller assemblies, P/Ns
B5JFR36C1101/114GCA-0, C5JFR36C1102/L114GCA-0, B5JFR36C1103/114HCA-0,
and C5JFR36C1104/L114HCA-0, of the same type design. We are issuing
this AD to detect cracked hubs, which could cause failure of the
propeller hub and loss of control of the airplane. This AD requires
performing a one-time eddy-current inspection of the propeller hub for
cracks within:
200 hours time-since-last inspection (TSLI), but not later
than 30 days after the effective date of this AD, on propeller
assemblies with more than 8,000 hours time-in-service (TIS) and, if
necessary, replacing the propeller assembly.
400 hours TSLI, but not later than 60 days after the
effective date of this AD, on propeller assemblies with 8,000 or fewer
hours TIS and, if necessary, replacing the propeller assembly.
You must use the service information described previously to
perform the actions required by this AD.
FAA's Determination of the Effective Date
Since an unsafe condition exists that requires the immediate
adoption of this AD, we have found that notice and opportunity for
public comment before issuing this AD are impracticable, and that good
cause exists for making this amendment effective in fewer than 30 days.
Interim Action
These actions are interim actions and we might take further
rulemaking actions in the future.
Comments Invited
This AD is a final rule that involves requirements affecting flight
safety and was not preceded by notice and an opportunity for public
comment; however, we invite you to send any written relevant data,
views, or arguments on this AD. Send your comments to an address listed
under ADDRESSES. Include ``AD Docket No. FAA-2004-19242; Directorate
Identifier 2004-NE-21-AD'' in the subject line of
[[Page 67808]]
your comments. We specifically invite comments on the overall
regulatory, economic, environmental, and energy aspects of the rule
that might suggest a need to adjust it.
We will post all comments we receive, without change, to http://dms.dot.gov, including any personal information you provide. We will
also post a report summarizing each substantive verbal contact with FAA
personnel about this AD. Using the search function of the Docket
Management System (DMS) web site, anyone can find and read the comments
in any of our dockets, including the name of the individual who sent
the comment (or signed the comment for an association, business, labor
union, etc.). You may review the DOT's complete Privacy Act Statement
in the Federal Register published on April 11, 2000 (65 FR 19477-78),
or you may visit http://dms.dot.gov.
We are reviewing the writing style we currently use in regulatory
documents. We are interested in your comments on whether the style of
this document is clear, and your suggestions to improve the clarity of
our communications with you. You can get more information about plain
language at http://www.faa.gov/language and http://www.plainlanguage.gov.
Examining the AD Docket
You may examine the docket that contains the AD, any comments
received, and any final disposition in person at the DMS Docket Offices
between 9 a.m. and 5 p.m., Monday through Friday, except Federal
holidays. The Docket Office (telephone (800) 647-5227) is located on
the plaza level of the Department of Transportation Nassif Building at
the street address stated in ADDRESSES. Comments will be available in
the AD docket shortly after the DMS receives them.
Regulatory Findings
We have determined that this AD will not have federalism
implications under Executive Order 13132. This AD will not have a
substantial direct effect on the States, on the relationship between
the national Government and the States, or on the distribution of power
and responsibilities among the various levels of government.
For the reasons discussed above, I certify that the regulation:
1. Is not a ``significant regulatory action'' under Executive Order
12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies
and Procedures (44 FR 11034, February 26, 1979); and
3. Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
We prepared a summary of the costs to comply with this AD and
placed it in the AD Docket. You may get a copy of this summary at the
address listed under ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
0
Under the authority delegated to me by the Administrator, the Federal
Aviation Administration amends part 39 of the Federal Aviation
Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2004-23-16 McCauley Propeller Systems: Amendment 39-13871. Docket
No. FAA-2004-19242; Directorate Identifier 2004-NE-21-AD.
Effective Date
(a) This airworthiness directive (AD) becomes effective December
7, 2004.
Affected ADs
(b) None.
Applicability
(c) This AD applies to McCauley Propeller Systems propeller
assemblies, part numbers (P/Ns) B5JFR36C1101/114GCA-0, C5JFR36C1102/
L114GCA-0, B5JFR36C1103/114HCA-0, and C5JFR36C1104/L114HCA-0,
installed on BAE Systems (Operations) Limited Jetstream Model 4100
series airplanes.
Unsafe Condition
(d) This AD results from three reports of cracked hubs. We are
issuing this AD to detect cracked hubs, which could cause failure of
the propeller hub and loss of control of the airplane.
Compliance
(e) You are responsible for having the actions required by this
AD performed within the compliance times specified unless the
actions have already been done.
Onetime Eddy-Current Inspection
(f) Perform a onetime eddy-current inspection using the
compliance times specified in Table 1 of this AD. Use 1.A. through
2.D.(7)(c) of the Accomplishment Instructions of McCauley Alert
Service Bulletin (ASB) No. ASB247A, Revision A, dated August 18,
2004.
Table 1.--Compliance Times
------------------------------------------------------------------------
If the propeller assembly has
. . . Then inspect . . .
------------------------------------------------------------------------
(1) More than 8,000 hours Within 200 hours time-since-last
time-in-service (TIS) on the inspection (TSLI) or within 30 days
effective date of this AD. after the effective date of this AD,
whichever is earlier.
(2) 8,000 or fewer hours TIS Within 400 hours TSLI or within 60 days
on the effective date of after the effective date of this AD,
this AD. whichever is earlier.
------------------------------------------------------------------------
Credit for Previous Compliance
(g) Performing the eddy-current inspection using McCauley ASB
No. A247, dated April 30, 2004, is acceptable for compliance with
this AD.
Reporting Requirements
(h) The reporting requirement specified in 2.D.(5) of the
Accomplishment Instructions of Alert Service Bulletin No. ASB247A,
Revision A, dated August 18, 2004, are approved by the Office of
Management and Budget and assigned OMB control number 2120-0056.
Alternative Methods of Compliance
(i) The Manager, Chicago Aircraft Certification Office, has the
authority to approve alternative methods of compliance for this AD
if requested using the procedures found in 14 CFR 39.19.
Material Incorporated by Reference
(j) You must use McCauley Propeller Systems Alert Service
Bulletin No. ASB247A, Revision A, dated August 18, 2004, to perform
the actions required by this AD. The Director of the Federal
Register approved the incorporation by reference of this service
bulletin in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You
can get a copy from McCauley Propeller Systems, P.O. Box 7704,
Wichita, KS 67277-7704, U.S.A.; telephone (800) 621-7767. You may
review copies on the internet at http://dms.dot.gov, or at the
National Archives and Records Administration (NARA). For information
on
[[Page 67809]]
the availability of this material at NARA, call 202-741-6030, or go
to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
Related Information
(k) None.
Issued in Burlington, Massachusetts, on November 10, 2004.
Peter A. White,
Acting Manager, Engine and Propeller Directorate, Aircraft
Certification Service.
[FR Doc. 04-25543 Filed 11-19-04; 8:45 am]
BILLING CODE 4910-13-U
Sources. Section 1 is written by AircraftDirectives from the record below and is a reading aid only. Section 2 is the United States Government's own text, reproduced without edit.
Federal Register: https://www.federalregister.gov/documents/2004/11/22/04-25543/airworthiness-directives-mccauley-propeller-systems-five-blade-propeller-assemblies
Official PDF: https://www.govinfo.gov/content/pkg/FR-2004-11-22/pdf/04-25543.pdf
Packet generated 2026-08-18 08:13 UTC.
This packet is not an airworthiness determination and not legal or maintenance advice. AircraftDirectives reproduces official records and condenses their wording for easier reading. It does not decide, certify or imply whether any aircraft, engine, appliance or part is airworthy, compliant, affected by this directive, or eligible for return to service. No inspection, approval, or determination of any kind is performed or implied by this document.
Section 1 is a reading aid, not the rule. It is our own plain-language condensation, written to help a reader find the relevant directive quickly. It is NOT a substitute for the regulation, it may omit conditions, exceptions, compliance times, alternative methods of compliance (AMOCs) and applicability limits, and it has no legal force whatsoever. Only the official text governs. Where Section 1 and Section 2 differ in any respect, Section 2 - and the official source it was retrieved from - controls absolutely.
Responsibility remains with the owner/operator. Under 14 CFR §91.403 and §91.417 the owner or operator is responsible for maintaining airworthiness and for required records; under §39.7 no person may operate a product to which an airworthiness directive applies except in accordance with that directive. Determining applicability to a specific serial number and configuration, and performing or supervising any required action, is the responsibility of the owner/operator and appropriately certificated personnel.
Accuracy and currency. Section 2 was retrieved at the time stamped above and is reproduced without edit; Federal Register material is a work of the United States Government. Directives are amended, corrected and superseded over time, and this sheet is a snapshot, not a live record - it does not update after printing. Re-check the official sources before acting on it. This packet is provided without warranty of any kind, express or implied, including fitness for a particular purpose. We do not sell parts and have no commercial interest in any action a directive may require.