AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2000-14-09 65 FR 44661 Active

Federal Aviation Administration · 14 CFR part 39

Requires affixing a label containing revised engine limitations on the ditching hatch, and revising the airplane flight manual to reflect the revised engine limitations.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
00-17759
Amendment
39-11818
Published
2000-07-19
Effective
2000-08-23
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/2000-14-09 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2000-14-09

FR doc 00-17759 · 65 FR 44661

AD 2000-14-09Published 2000-07-19Effective 2000-08-23

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires affixing a label containing revised engine limitations on the ditching hatch, and revising the airplane flight manual to reflect the revised engine limitations.

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to certain Short Brothers Model SD3-60 series airplanes, that requires affixing a label containing revised engine limitations on the ditching hatch, and revising the airplane flight manual to reflect the revised engine limitations. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified by this AD are intended to prevent the use of incorrect engine limitations, which could result in an overspeed of the propellers and potential for blade failure.

More directives for Shorts SD3-30 / SD3-60

  1. AD 2010-24-06 Airworthiness Directives; Short Brothers PLC Model SD3 Airplanes Effective 2011-02-16
  2. AD 2008-16-09 R1 Airworthiness Directives; Short Brothers Model SD3-60 Airplanes Effective 2009-09-16
  3. AD 2008-16-09 Airworthiness Directives; Short Brothers Model SD3-60 Airplanes Effective 2008-09-15
  4. AD 2008-12-08 Airworthiness Directives; Short Brothers Model SD3-60 Airplanes Equipped... Effective 2008-07-15
  5. AD 2007-08-09 Airworthiness Directives; Short Brothers Model SD3-60 SHERPA, SD3-SHERPA... Effective 2007-05-08

All Shorts SD3-30 / SD3-60 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index