Airworthiness Directive

AD 2001-13-18 66 FR 34802 Active

Federal Aviation Administration · 14 CFR part 39

FR document
01-16250
Amendment
39-12300
Published
2001-07-02
Effective
2001-08-16
Models covered
1
Last live check
2026-10-01
This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2001-13-18

FR doc 01-16250 · 66 FR 34802

AD 2001-13-18Published 2001-07-02Effective 2001-08-16

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires flight and operating limitations on Raytheon Aircraft Corporation (Raytheon) Beech Models 45 (YT-34), A45 (T-34A, B-45), and D45 (T-34B) airplanes.

Full official abstract

This document supersedes Airworthiness Directive (AD) 99-12- 02, which currently requires flight and operating limitations on Raytheon Aircraft Corporation (Raytheon) Beech Models 45 (YT-34), A45 (T-34A, B-45), and D45 (T-34B) airplanes. AD 99-12-02 resulted from a report of an in-flight separation of the right wing on a Raytheon Beech Model A45 (T-34A) airplane. The AD was issued as an interim action until the development of FAA-approved inspection procedures. Raytheon has developed procedures to inspect the wing spar assemblies of the above-referenced airplanes. This AD requires repetitive inspections of the wing spar assembly for cracks with replacement of any wing spar assembly found cracked (unless the spar assembly has a crack indication in the filler strip where the direction of the crack is toward the outside edge of the filler strip). This AD also includes a reporting requirement of the results of the initial inspection and maintains the flight and operating restrictions required by AD 99-12-02 until accomplishment of the initial inspection. The actions specified by this AD are intended to prevent wing spar failure caused by fatigue cracks in the wing spar assemblies and ensure the operational safety of the above-referenced airplanes.

More directives for Beechcraft T-34 Mentor

  1. AD 2007-08-08 Airworthiness Directives; Raytheon Aircraft Company (The Beech Aircraft ... 2007-04-20
  2. AD 2007-06-01 Airworthiness Directives; Raytheon Aircraft Company Beech Models 45 (YT-... 2007-03-12
  3. AD 2004-25-51 Airworthiness Directives; Raytheon Aircraft Company Beech Models 45 (YT-... 2004-12-20
  4. AD 2001-13-18 R1 Airworthiness Directives; Raytheon Aircraft Corporation Beech Models 45 ... 2004-03-01
  5. AD 2001-23-10 Airworthiness Directives; Raytheon Aircraft Company 33, T-34, 35, 36, 55... 2001-11-21

All Beechcraft T-34 Mentor directives

Applies to 1 model in our index