Airworthiness Directive

AD 2002-08-02 67 FR 19327 Active

Federal Aviation Administration · 14 CFR part 39

FR document
02-9574
Amendment
39-12709
Published
2002-04-19
Effective
2002-06-06
Models covered
1
Last live check
2026-10-03
This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2002-08-02

FR doc 02-9574 · 67 FR 19327

AD 2002-08-02Published 2002-04-19Effective 2002-06-06

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to replace the brake shuttle valves with parts of improved design and install a shield over the hydraulic lines on certain Fairchild Aircraft SA226 and SA227 series airplanes.

Full official abstract

This amendment supersedes Airworthiness Directive (AD) 2001- 20-14, which currently requires you to replace the brake shuttle valves with parts of improved design and install a shield over the hydraulic lines on certain Fairchild Aircraft SA226 and SA227 series airplanes. AD 2001-20-14 also requires you to replace the rubber fuel hose with a metal device for certain SA226 series airplanes. This AD is the result of FAA incorrectly referencing Model SA226--T(A) airplanes and inadvertently omitting certain serial numbers of Model SA227--AC airplanes from the applicability of AD 2001-20-14. This AD retains the actions of AD 2001-20-14, corrects the reference of Model SA226--T(A) airplanes and adds additional Model SA227--AC airplanes to the applicability section of the AD. The actions specified by this AD are intended to correct potential brake shuttle valve problems, which could cause the brake assembly to drag and overheat. Hydraulic or fuel line damage could then occur if the overheated brake assembly is retracted into the main wheel well with a consequent fire if the hydraulic or fuel lines ruptured.

More directives for Fairchild SA226/SA227 Metro

  1. AD 2021-01-02 Airworthiness Directives; M7 Aerospace LLC Airplanes 2021-01-22
  2. AD 2017-07-01 Airworthiness Directives; M7 Aerospace LLC Models Airplanes 2017-03-31
  3. AD 2016-25-12 Airworthiness Directives; M7 Aerospace LLC 2016-12-08
  4. AD 2016-15-02 Airworthiness Directives; M7 Aerospace LLC Airplanes 2016-07-22
  5. AD 2016-10-01 Airworthiness Directives; M7 Aerospace LLC Airplanes 2016-05-11

All Fairchild SA226/SA227 Metro directives

Applies to 1 model in our index