AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2002-09-12 67 FR 31115 Active

Federal Aviation Administration · 14 CFR part 39

Requires you to inspect the left-hand (LH) and right-hand (RH) nacelle and spar assembly for the existence of rivets, and requires you to install rivets if they do not exist or are the wrong size or type.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
02-11333
Amendment
39-12745
Published
2002-05-09
Effective
2002-06-21
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2002-09-12 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2002-09-12

FR doc 02-11333 · 67 FR 31115

AD 2002-09-12Published 2002-05-09Effective 2002-06-21

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to inspect the left-hand (LH) and right-hand (RH) nacelle and spar assembly for the existence of rivets, and requires you to install rivets if they do not exist or are the wrong size or type.

Full official abstract

This amendment adopts a new airworthiness directive (AD) that applies to certain Raytheon Aircraft Company (Raytheon) Beech Model C90 airplanes. This AD requires you to inspect the left-hand (LH) and right-hand (RH) nacelle and spar assembly for the existence of rivets, and requires you to install rivets if they do not exist or are the wrong size or type. This AD is the result of Raytheon identifying several instances where rivets were either missing or were the wrong size or type on these airplanes. The actions specified by this AD are intended to correct the installation of rivets in the LH and RH nacelle and spar assembly. These rivets must be present and have the correct dimension in order to prevent reduced structural integrity, which could result in structural failure and possible loss of control of the airplane.

More directives for Beechcraft King Air 90

  1. AD 2020-25-01 Airworthiness Directives; Textron Aviation, Inc. Airplanes (Type Certifi... Effective 2021-01-11
  2. AD 2012-21-06 Airworthiness Directives; Hawker Beechcraft Corporation Airplanes Effective 2012-11-27
  3. AD 2007-12-06 Airworthiness Directives; Hawker Beechcraft Corporation (Type Certificat... Effective 2007-07-16
  4. AD 2006-23-02 Airworthiness Directives; Raytheon Aircraft Company Models C90A, B200, B... Effective 2006-12-13
  5. AD 2006-13-10 Airworthiness Directives; Raytheon Aircraft Company 65, 90, 99, and 100 ... Effective 2006-08-07

All Beechcraft King Air 90 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index