Airworthiness Directive

AD 2003-17-04 68 FR 50064 Active

Federal Aviation Administration · 14 CFR part 39

Requires you to repetitively inspect the cockpit windshield and cabin window surfaces for damage (damage is defined as crazing, scratches, and cracks).

FR document
03-20985
Amendment
39-13278
Published
2003-08-20
Effective
2003-10-03
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2003-17-04

FR doc 03-20985 · 68 FR 50064

AD 2003-17-04Published 2003-08-20Effective 2003-10-03

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to repetitively inspect the cockpit windshield and cabin window surfaces for damage (damage is defined as crazing, scratches, and cracks).

Full official abstract

This amendment adopts a new airworthiness directive (AD) that applies to certain Mitsubishi Heavy Industries, Ltd. (Mitsubishi) MU-2B series airplanes. This AD requires you to repetitively inspect the cockpit windshield and cabin window surfaces for damage (damage is defined as crazing, scratches, and cracks). If any of the windshield or window surfaces have damage that exceeds certain limits, this AD requires you to replace the windshield or window. If the damage does not exceed certain limits, this AD allows you to blend out the damage following maintenance manual procedures. This AD is the result of continuing airworthiness information (MCAI) issued by the airworthiness authority for Japan. The actions specified by this AD are intended to prevent cockpit windshield or cabin window separation during flight, which could result in engine ingestion of glass, wing skin damage, or propeller damage, and possible loss of control of the airplane.

More directives for Mitsubishi MU-2

  1. AD 2020-26-14 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes Effective 2021-02-02
  2. AD 2016-08-19 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes Effective 2016-06-06
  3. AD 2015-01-02 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes Effective 2015-02-26
  4. AD 2010-10-17 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Various Mode... Effective 2010-07-22
  5. AD 2007-17-09 Airworthiness Directives; Mitsubishi Heavy Industries MU-2B Series Airpl... Effective 2007-09-25

All Mitsubishi MU-2 directives

Applies to 1 model in our index