Airworthiness Directive

AD 2006-08-08 71 FR 19986 Superseded

Federal Aviation Administration · 14 CFR part 39

Requires you to lower the safe life for the wing lower spar cap for certain Models AT-402A and AT-402B airplanes and those that incorporate or have incorporated Marburger Enterprises, Inc.

FR document
06-3617
Amendment
39-14563
Published
2006-04-19
Effective
2006-04-21
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2006-08-08

FR doc 06-3617 · 71 FR 19986

AD 2006-08-08Published 2006-04-19Effective 2006-04-21

Revised by 2006-08-08 R1

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to lower the safe life for the wing lower spar cap for certain Models AT-402A and AT-402B airplanes and those that incorporate or have incorporated Marburger Enterprises, Inc.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain Air Tractor, Inc. (Air Tractor) Models AT-400, AT-401, AT-401B, AT-402, AT-402A, and AT-402B airplanes. This AD requires you to lower the safe life for the wing lower spar cap for certain Models AT-402A and AT-402B airplanes and those that incorporate or have incorporated Marburger Enterprises, Inc. (Marburger) winglets. For Models AT-400, AT-401, AT-401B, AT-402, and certain AT-402A, airplanes, this AD requires you to repetitively inspect the wing lower spar cap in order to reach the safe life. We also developed an alternative method of compliance (AMOC) to the requirements of this Ad for certain Models AT- 402A and AT-402B airplanes. The AMOC includes repetitive eddy current inspections, modification of the center splice connection, and lower spar cap replacement. This AD is the result of reports of cracks in the \3/8\-inch bolt hole of the wing lower spar cap before reaching the approved safe life. We are issuing this AD to prevent fatigue cracks from occurring in the wing lower spar cap before the originally established safe life is reached. Fatigue cracks in the wing lower spar cap, if not detected and corrected, could result in wing separation and loss of control of the airplane.

More directives for Air Tractor AT-Series

  1. AD 2026-16-12 Airworthiness Directives; Air Tractor, Inc. Airplanes Effective 2026-08-31
  2. AD 2024-16-06 Airworthiness Directives; Air Tractor, Inc. Airplanes Effective 2024-09-04
  3. AD 2023-15-07 Airworthiness Directives; Air Tractor, Inc. Airplanes Effective 2023-08-09
  4. AD 2021-05-14 Airworthiness Directives; Air Tractor, Inc., Airplanes Effective 2021-04-29
  5. AD 2014-16-17 Airworthiness Directives; Air Tractor, Inc. Airplanes Effective 2014-09-29

All Air Tractor AT-Series directives

Applies to 1 model in our index