AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2007-11-01 72 FR 28830 Active

Federal Aviation Administration · 14 CFR part 39

Requires removing the buckle assembly and the buckle assembly spacer, and replacing them with airworthy parts.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
E7-9687
Amendment
39-15058
Published
2007-05-23
Effective
2007-06-27
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2007-11-01 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2007-11-01

FR doc E7-9687 · 72 FR 28830

AD 2007-11-01Published 2007-05-23Effective 2007-06-27

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires removing the buckle assembly and the buckle assembly spacer, and replacing them with airworthy parts.

Full official abstract

This amendment adopts a new airworthiness directive (AD) for Robinson Helicopter Company (Robinson) Model R44 and R44 II helicopters that have a certain seat belt buckle (buckle) assembly installed, that requires removing the buckle assembly and the buckle assembly spacer, and replacing them with airworthy parts. This amendment is prompted by an accident in which a seat belt failed, and also by reports of cracking in the buckle assembly stainless support strap (support strap). The actions specified by this AD are intended to prevent cracking in the support strap and failure of a seat belt.

More directives for Robinson R44

  1. AD 2025-11-07 Airworthiness Directives; Robinson Helicopter Company Helicopters Effective 2025-07-11
  2. AD 2024-23-01 Airworthiness Directives; Robinson Helicopter Company Effective 2025-01-07
  3. AD 2024-20-03 Airworthiness Directives; Robinson Helicopter Company Helicopters Effective 2024-11-29
  4. AD 2024-19-11 Airworthiness Directives; Robinson Helicopter Company Helicopters Effective 2024-10-31
  5. AD 2024-04-02 Airworthiness Directives; Robinson Helicopter Company Helicopters Effective 2024-04-02

All Robinson R44 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index