Airworthiness Directive

AD 2009-08-05 74 FR 16117 Active

Federal Aviation Administration · 14 CFR part 39

FR document
E9-8075
Amendment
39-15878
Published
2009-04-09
Effective
2009-04-20
Models covered
1
Last live check
2026-10-02
This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2009-08-05

FR doc E9-8075 · 74 FR 16117

AD 2009-08-05Published 2009-04-09Effective 2009-04-20

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to repetitively inspect the exhaust muffler for cracks and to replace the exhaust muffler when cracks are found.

Full official abstract

We are adopting a new airworthiness directive (AD) for certain Liberty Aerospace Incorporated Model XL-2 airplanes. This AD requires you to repetitively inspect the exhaust muffler for cracks and to replace the exhaust muffler when cracks are found. This AD is the result of reports that cracks have been found in the exhaust muffler during maintenance and service inspections. We are issuing this AD to detect and correct cracks in the exhaust muffler, which could result in carbon monoxide entering the cabin through the heating system. Carbon monoxide entering into the airplane cabin could lead to incapacitation of the pilot.

More directives for Liberty XL-2

  1. AD 2009-08-05 R1 Airworthiness Directives; Liberty Aerospace Incorporated Model XL-2 Airp... 2010-04-19

All Liberty XL-2 directives

Applies to 1 model in our index