AD 2013-13-06 78 FR 47531 Active

We are adopting a new airworthiness directive (AD) for Arrow Falcon Exporters, Inc. (previously Utah State University); Firefly Aviation Helicopter Services (previously Erickson Air-Crane Co.); California Department of Forestry; Garlick Helicopters, Inc.; Global Helicopter Technology, Inc.; Hagglund Helicopters, LLC (previously Western International Aviation, Inc.); International Helicopters, Inc.; Precision Helicopters, LLC; Robinson Air Crane, Inc.; San Joaquin Helicopters (previously Hawkins and Powers Aviation, Inc.); S.M.&T. Aircraft (previously US Helicopters, Inc., UNC Helicopter, Inc., Southern Aero Corporation, and Wilco Aviation); Smith Helicopters; Southern Helicopter, Inc.; Southwest Florida Aviation International, Inc. (previously Jamie R. Hill and Southwest Florida Aviation); Tamarack Helicopters, Inc. (previously Ranger Helicopter Services, Inc.); US Helicopter, Inc. (previously UNC Helicopter, Inc.); West Coast Fabrication; and Williams Helicopter Corporation (previously Scott Paper Co.) Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, and UH-1P Helicopters; and Southwest Florida Aviation Model UH- 1B (SW204 and SW204HP) and UH-1H (SW205) Helicopters. This AD requires creating a component history card or equivalent record for each main rotor grip (grip); determining and recording the total hours time-in- service (TIS) for each grip; visually inspecting the upper and lower tangs of the grip for a crack; inspecting the grip buffer pads for delamination and if delamination is present, inspecting the grip surface for corrosion or other damage; inspecting the grip for a crack using ultrasonic (UT) and fluorescent penetrant inspection methods; and establishing a retirement life for certain grips. This AD was prompted by three in-flight failures of grips installed on Bell Helicopter Textron (Bell) Model 212 helicopters, which resulted from cracks originating in the lower main rotor blade bolt lug. The actions are intended to prevent failure of the grip, separation of a main rotor blade, and subsequent loss of control of the helicopter.