Airworthiness Directive

AD 2014-12-04 80 FR 34534 Active

Federal Aviation Administration · 14 CFR part 39

FR document
2015-14694
Amendment
39-18177
Published
2015-06-17
Effective
2015-07-22
Models covered
1
Last live check
2026-10-02
This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2014-12-04

FR doc 2015-14694 · 80 FR 34534

AD 2014-12-04Published 2015-06-17Effective 2015-07-22

Supersedes 2006-15-08

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires initial and repetitive dimensional inspections of the affected fuel control drives and insertion of certain airplane operating procedures into the applicable flight manuals.

Full official abstract

We are superseding airworthiness directive (AD) 2006-15-08 for all Honeywell International Inc. TPE331-1, -2, -2UA, -3U, -3UW, -5, - 5A, -5AB, -5B, -6, -6A, -10, -10AV, -10GP, -10GT, -10P, -10R, -10T, - 10U, -10UA, -10UF, -10UG, -10UGR, -10UR, -11U, -12JR, -12UA, -12UAR, and -12UHR turboprop engines with certain Honeywell part numbers (P/Ns) of Woodward fuel control unit (FCU) assemblies, installed. AD 2006-15- 08 required initial and repetitive dimensional inspections of the fuel control drives for wear, and replacement of the FCU and fuel pump. This new AD requires initial and repetitive dimensional inspections of the affected fuel control drives and insertion of certain airplane operating procedures into the applicable flight manuals. This AD was prompted by reports of loss of the fuel control drive, leading to engine overspeed, overtorque, overtemperature, uncontained rotor failure, and asymmetric thrust in multi-engine airplanes. We are issuing this AD to prevent failure of the fuel control drive that could result in damage to the engine and airplane.

More directives for Honeywell TPE331

  1. AD 2018-22-01 Airworthiness Directives; Honeywell International Inc. Turboprop Engines 2018-11-05
  2. AD 2018-17-15 Airworthiness Directives; Honeywell International Inc. Turboprop and Tur... 2018-09-17
  3. AD 2018-13-05 Airworthiness Directives; Honeywell International Inc. Turboprop and Tur... 2018-06-21
  4. AD 2018-02-14 Airworthiness Directives; Honeywell International Inc. Turboprop and Tur... 2018-01-24
  5. AD 2016-21-07 Airworthiness Directives; Honeywell International Inc. Turboprop Engines 2016-10-24

All Honeywell TPE331 directives

Applies to 1 model in our index