Airworthiness Directive

AD 2014-16-03 79 FR 45327 Active

Federal Aviation Administration · 14 CFR part 39

Requires actions to address the unsafe condition on these products.

FR document
2014-18260
Amendment
39-17927
Published
2014-08-05
Effective
2014-09-09
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2014-16-03

FR doc 2014-18260 · 79 FR 45327

AD 2014-16-03Published 2014-08-05Effective 2014-09-09

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires actions to address the unsafe condition on these products.

Full official abstract

We are adopting a new airworthiness directive (AD) for Fuji Heavy Industries, Ltd. Models FA-200-160, FA-200-180, and FA-200-180AO airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as deterioration of brake performance due to seal defects caused by deterioration due to age of the O-rings of the brake master cylinder. We are issuing this AD to require actions to address the unsafe condition on these products.

More directives for Fuji FA-200 Aero Subaru

  1. AD 2006-20-13 Airworthiness Directives; Fuji Heavy Industries, Ltd. FA-200 Series Airp... Effective 2006-11-14

All Fuji FA-200 Aero Subaru directives

Applies to 1 model in our index