Airworthiness Directive

AD 2019-03-05 84 FR 4685 Active

Federal Aviation Administration · 14 CFR part 39

Prompted by revised airworthiness limitations determined by Bell.

FR document
2019-02626
Amendment
39-19557
Published
2019-02-19
Effective
2019-03-26
Models covered
1

Last live check: 2026-10-04

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2019-03-05

FR doc 2019-02626 · 84 FR 4685

AD 2019-03-05Published 2019-02-19Effective 2019-03-26

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Prompted by revised airworthiness limitations determined by Bell.

Full official abstract

We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada Limited (Bell) Model 429 helicopters. This AD revises the life limit for the nose landing gear (NLG) assembly. This AD was prompted by revised airworthiness limitations determined by Bell. The actions of this AD are intended to prevent an unsafe condition on these products.

More directives for Bell 429

  1. AD 2026-06-02 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2026-04-24
  2. AD 2024-07-51 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2024-06-10
  3. AD 2022-20-11 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-11-28
  4. AD 2022-09-07 Airworthiness Directives; Bell Textron Canada Limited (Type Certificate ... Effective 2022-05-31
  5. AD 2022-08-11 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-05-27

All Bell 429 directives

Applies to 1 model in our index