Airworthiness Directive

AD 2020-15-03 85 FR 45069 Active

Federal Aviation Administration · 14 CFR part 39

Requires an inspection of the engine PT disk and, if found damaged, its replacement with a part eligible for installation.

FR document
2020-16121
Amendment
39-21166
Published
2020-07-27
Effective
2020-08-31
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2020-15-03

FR doc 2020-16121 · 85 FR 45069

AD 2020-15-03Published 2020-07-27Effective 2020-08-31

Supersedes 2016-07-13, 2018-03-22

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires an inspection of the engine PT disk and, if found damaged, its replacement with a part eligible for installation.

Full official abstract

The FAA is superseding Airworthiness Directive (AD) 2016-07-13 and AD 2018-03-22 which apply to certain GE Aviation Czech s.r.o. M601D-11, M601E-11, M601E-11A, M601E-11AS, M601E-11S, and M601F model turboprop engines. AD 2016-07-13 required inspection of the engine power turbine (PT) disk and, if found damaged, its replacement with a part eligible for installation. AD 2018-03-22 required the removal of certain engine PT disks identified by part number (P/N) installed on the affected engines. This AD requires an inspection of the engine PT disk and, if found damaged, its replacement with a part eligible for installation. This AD also requires the removal of certain engine PT disks identified by P/N installed on the affected engines. This AD was prompted by the discovery of damage to certain engine PT disks and a review by the manufacturer that determined that certain engine PT rotors have less overspeed margin than originally declared during product certification. This AD was also prompted by the manufacturer identifying additional P/Ns and serial numbers (S/Ns) of engine PT disks affected by damage or non-conformity since publishing AD 2016-07- 13 and AD 2018-03-22. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for GE Aviation Czech M601/H80

  1. AD 2025-18-08 Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Pre... Effective 2025-10-21
  2. AD 2024-06-02 Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Pre... Effective 2024-04-11
  3. AD 2024-03-05 Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Pre... Effective 2024-04-17
  4. AD 2024-02-04 Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Pre... Effective 2024-03-28
  5. AD 2024-01-03 Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Pre... Effective 2024-02-27

All GE Aviation Czech M601/H80 directives

Applies to 1 model in our index