AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2020-16-06 85 FR 49962 Active

Federal Aviation Administration · 14 CFR part 39

Requires repetitive inspections of the forward horizontal stabilizer support assembly and the rear horizontal stabilizer support tube and reporting information to the FAA.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
2020-17904
Amendment
39-21190
Published
2020-08-17
Effective
2020-09-01
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2020-16-06 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2020-16-06

FR doc 2020-17904 · 85 FR 49962

AD 2020-16-06Published 2020-08-17Effective 2020-09-01

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitive inspections of the forward horizontal stabilizer support assembly and the rear horizontal stabilizer support tube and reporting information to the FAA.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for all Aviat Aircraft Inc. Models A-1, A-1A, A-1B, A-1C-180, and A-1C-200 airplanes. This AD requires repetitive inspections of the forward horizontal stabilizer support assembly and the rear horizontal stabilizer support tube and reporting information to the FAA. This AD was prompted by field reports of complete failure of both the forward support assembly and the rear support tube due to fatigue. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Aviat A-1 Husky

  1. AD 2019-10-06 Airworthiness Directives; Aviat Aircraft Inc. Airplanes Effective 2019-07-22

All Aviat A-1 Husky directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index