AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2021-02-20 86 FR 8299 Superseded

Federal Aviation Administration · 14 CFR part 39

Requires an initial and repetitive inspections of certain rotating and non-rotating scissor fittings, and depending on the results, replacing the affected assembly.

Superseded by AD 2022-07-12Federal Register (opens in a new tab)

FR document
2021-02532
Amendment
39-21403
Published
2021-02-05
Effective
2021-02-22
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/2021-02-20 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2021-02-20

FR doc 2021-02532 · 86 FR 8299

AD 2021-02-20Published 2021-02-05Effective 2021-02-22

Superseded by 2022-07-12

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires an initial and repetitive inspections of certain rotating and non-rotating scissor fittings, and depending on the results, replacing the affected assembly.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for all Hélicoptères Guimbal Model Cabri G2 helicopters. This AD was prompted by a report of a crack in a rotating scissor fitting. This AD requires an initial and repetitive inspections of certain rotating and non-rotating scissor fittings, and depending on the results, replacing the affected assembly. This AD also prohibits installing certain main rotor hubs (MRHs) and swashplate guides unless the initial inspection has been accomplished. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Guimbal Cabri G2

  1. AD 2026-10-51 Airworthiness Directives; Hélicoptères Guimbal Helicopters Effective 2026-06-24
  2. AD 2025-24-08 Airworthiness Directives; Hélicoptères Guimbal Helicopters Effective 2026-01-13
  3. AD 2024-01-52 Airworthiness Directives; Hélicoptères Guimbal Helicopters Effective 2024-02-21
  4. AD 2023-24-51 Airworthiness Directives; Hélicoptères Guimbal Helicopters Effective 2023-12-28
  5. AD 2022-07-12 Airworthiness Directives; Hélicoptères Guimbal Helicopters Effective 2022-05-10

All Guimbal Cabri G2 directives

View on Federal Register (opens in a new tab) Search DRS manually for AD 2021-02-20 (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index