Airworthiness Directive

AD 2021-06-06 86 FR 14366 Superseded

Federal Aviation Administration · 14 CFR part 39

Requires repetitive FPIs of the pilot collective stick, and requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter.

FR document
2021-05513
Amendment
39-21473
Published
2021-03-16
Effective
2021-03-31
Models covered
1

Last live check: 2026-10-04

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2021-06-06

FR doc 2021-05513 · 86 FR 14366

AD 2021-06-06Published 2021-03-16Effective 2021-03-31

Superseded by 2022-04-06

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitive FPIs of the pilot collective stick, and requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter.

Supersedes an earlier directive that is not in our index. See the official text.

Full official abstract

The FAA is superseding Emergency Airworthiness Directive (AD) 2021-05-52 which applied to certain Bell Textron Canada Limited (Bell) Model 505 helicopters. Emergency AD 2021-05-52 required a one-time visual inspection of the pilot collective stick and grip assembly (pilot collective stick), a fluorescent penetrant inspection (FPI) if no crack was found during the visual inspection, and depending on the inspection results, removing the pilot collective stick from service and reporting certain information to Bell. Emergency AD 2021-05-52 also prohibited installing any pilot collective stick on any helicopter unless the inspections had been accomplished. This AD removes the visual inspection of the pilot collective stick, requires repetitive FPIs of the pilot collective stick, and requires revising the existing Rotorcraft Flight Manual (RFM) for your helicopter. This AD retains the reporting requirement and expands the prohibition. This AD was prompted by the determination that visual inspections do not adequately detect a crack and additional findings that a crack may occur sooner than previously expected. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Bell 505 Jet Ranger X

  1. AD 2026-18-10 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2026-10-22
  2. AD 2026-16-02 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2026-09-10
  3. AD 2026-15-06 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2026-09-03
  4. AD 2026-05-51 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2026-04-16
  5. AD 2025-22-03 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2025-11-20

All Bell 505 Jet Ranger X directives

Applies to 1 model in our index