AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2021-15-06 86 FR 38907 Active

Federal Aviation Administration · 14 CFR part 39

Requires determining if an affected part is installed (by doing a maintenance records check or inspection), and if an affected part is found, replacement with a non-affected part.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
2021-15478
Amendment
39-21653
Published
2021-07-23
Effective
2021-08-27
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/2021-15-06 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2021-15-06

FR doc 2021-15478 · 86 FR 38907

AD 2021-15-06Published 2021-07-23Effective 2021-08-27

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires determining if an affected part is installed (by doing a maintenance records check or inspection), and if an affected part is found, replacement with a non-affected part.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain Bell Helicopter Textron Canada Limited (now Bell Textron Canada Limited) Model 206A, 206B, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This AD was prompted by a report that a certain tail rotor disc assembly, sold as an alternate part, does not conform to the approved configuration. This AD requires determining if an affected part is installed (by doing a maintenance records check or inspection), and if an affected part is found, replacement with a non-affected part. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Bell 206 JetRanger / LongRanger

  1. AD 2023-06-05 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2023-05-19
  2. AD 2022-22-08 Airworthiness Directives; Bell Textron Canada Limited (Type Certificate ... Effective 2022-12-23
  3. AD 2022-20-04 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-12-23
  4. AD 2021-26-08 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-01-27
  5. AD 2021-24-15 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-01-18

All Bell 206 JetRanger / LongRanger directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index