AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2021-20-02 86 FR 52821 Active

Federal Aviation Administration · 14 CFR part 39

Requires determining the total hours time-in-service (TIS) of certain part-numbered main rotor grip assemblies (grip assemblies), establishing a life limit for certain part-numbered grip assemblies, removing from service any grip…

Federal Register (opens in a new tab)

FR document
2021-20408
Amendment
39-21740
Published
2021-09-23
Effective
2021-10-28
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/2021-20-02 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2021-20-02

FR doc 2021-20408 · 86 FR 52821

AD 2021-20-02Published 2021-09-23Effective 2021-10-28

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires determining the total hours time-in-service (TIS) of certain part-numbered main rotor grip assemblies (grip assemblies), establishing a life limit for certain part-numbered grip assemblies, removing from service any grip assembly that has reached or exceeded its retirement life, creating a component history card, and removing any grip assembly from service before reaching its retirement life.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Inc. (type certificate previously held by Bell Helicopter Textron Inc.) Model 205B helicopters. This AD was prompted by a notification of certain parts needing a life limit. This AD requires determining the total hours time-in-service (TIS) of certain part-numbered main rotor grip assemblies (grip assemblies), establishing a life limit for certain part-numbered grip assemblies, removing from service any grip assembly that has reached or exceeded its retirement life, creating a component history card, and removing any grip assembly from service before reaching its retirement life. This AD also prohibits installing certain grip assemblies unless the life limit was established in accordance with this AD. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Bell 205 / 212

  1. AD 2024-16-19 Airworthiness Directives; Bell Textron Inc. Helicopters Effective 2024-11-08
  2. AD 2024-17-02 Airworthiness Directives; Bell Textron Inc. Helicopters Effective 2024-11-08
  3. AD 2024-19-17 Airworthiness Directives; Bell Textron Inc. and Various Restricted Categ... Effective 2024-10-11
  4. AD 2022-20-14 Airworthiness Directives; Bell Textron Inc., Helicopters and Various Res... Effective 2022-12-27
  5. AD 2022-22-12 Airworthiness Directives; Bell Textron Inc., Erickson 214 Holdings, LLC,... Effective 2022-11-22

All Bell 205 / 212 directives

View on Federal Register (opens in a new tab) Search DRS manually for AD 2021-20-02 (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index