Airworthiness Directive

AD 95-16-08 60 FR 39842 Active

Federal Aviation Administration · 14 CFR part 39

Requires a record check of engine records to determine if any repair, assembly, modification, or installation work was performed by Fliteline Maintenance, formerly located in Wharton, Texas, or Mr.

FR document
95-19230
Amendment
39-9328
Published
1995-08-04
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

95-16-08

FR doc 95-19230 · 60 FR 39842

AD 95-16-08Published 1995-08-04

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires a record check of engine records to determine if any repair, assembly, modification, or installation work was performed by Fliteline Maintenance, formerly located in Wharton, Texas, or Mr.

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to AlliedSignal, Inc. (formerly Allied-Signal, Inc., Garrett Engine Division, Garrett Turbine Engine Company, and AiResearch Manufacturing Co. of Arizona) TPE331 series turboprop and TSE331 series turboshaft engines, that requires a record check of engine records to determine if any repair, assembly, modification, or installation work was performed by Fliteline Maintenance, formerly located in Wharton, Texas, or Mr. Eugene E. Shanks, or Mr. Carl Ramirez (collectively referred to as ``Fliteline''). In addition, for engines determined to have repair, assembly, modification, or installation work performed by Fliteline, this action requires verification of all life limited components, inspection of affected components, and verification of compliance with all applicable AD's. This amendment is prompted by the results of a Federal Aviation Administration (FAA) investigation involving engines repaired, assembled, modified, or installed by Fliteline. The actions specified by this AD are intended to prevent uncontained failure of turbine rotors, fire, or loss of aircraft control.

More directives for Honeywell TPE331

  1. AD 2018-22-01 Airworthiness Directives; Honeywell International Inc. Turboprop Engines Effective 2018-12-10
  2. AD 2018-17-15 Airworthiness Directives; Honeywell International Inc. Turboprop and Tur... Effective 2018-10-22
  3. AD 2018-13-05 Airworthiness Directives; Honeywell International Inc. Turboprop and Tur... Effective 2018-07-26
  4. AD 2018-02-14 Airworthiness Directives; Honeywell International Inc. Turboprop and Tur... Effective 2018-02-28
  5. AD 2016-21-07 Airworthiness Directives; Honeywell International Inc. Turboprop Engines Effective 2016-11-28

All Honeywell TPE331 directives

Applies to 1 model in our index