Airworthiness Directive

AD 96-02-04 61 FR 2703 Active

Federal Aviation Administration · 14 CFR part 39

Requires engines certified to operate on 91 octane or higher avgas to undergo a teardown and analytical inspection for detonation damage, and engines certified to operate on 80 octane avgas to undergo inspection for evidence of…

FR document
96-1410
Published
1996-01-29
Effective
1996-02-13
Models covered
1

Last live check: 2026-11-14

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

96-02-04

FR doc 96-1410 · 61 FR 2703

AD 96-02-04Published 1996-01-29Effective 1996-02-13

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires engines certified to operate on 91 octane or higher avgas to undergo a teardown and analytical inspection for detonation damage, and engines certified to operate on 80 octane avgas to undergo inspection for evidence of possible internal engine damage.

Supersedes an earlier directive that is not in our index. See the official text.

Why this AD
Prompted by updated information that has identified the correct engine model numbers.
Applies to
Franklin Model 6A4-150-B3 and 6A4-165- B3 Reciprocating Engines · 1 model in our index, listed below
Full official abstract

This amendment adopts a new airworthiness directive (AD) that is applicable to Franklin Model 6A4-150-B3 and 6A4-165-B3 reciprocating engines, installed on the following U.S. registered aircraft: N6209M, N74231, and N752C. This action supersedes priority letter AD 94-14-11 that currently requires engines certified to operate on 91 octane or higher avgas to undergo a teardown and analytical inspection for detonation damage, and engines certified to operate on 80 octane avgas to undergo inspection for evidence of possible internal engine damage. This action revises incorrect engine model numbers listed in the priority letter AD. This amendment is prompted by updated information that has identified the correct engine model numbers. The actions specified by this AD are intended to prevent detonation due to low octane, which can result in severe engine damage and subsequent failure.

More directives for Franklin 6A

  1. AD 2003-05-01 Airworthiness Directives; Wytwornia Sprzetu Komunikacyjnego (WSK) PZL-Rz... Effective 2003-03-21

All Franklin 6A directives

Applies to 1 model in our index

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.