Airworthiness Directive

AD 96-06-04 61 FR 11538 Active

Federal Aviation Administration · 14 CFR part 39

Requires an inspection of the main transmission input driveshaft assembly (driveshaft) at intervals of 300 hours time-in-service (TIS); the application of a zinc chromate primer inspection visual aid; and, daily visual checks of…

FR document
96-6419
Published
1996-03-21
Effective
1996-04-25
Models covered
1

Last live check: 2026-11-14

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

96-06-04

FR doc 96-6419 · 61 FR 11538

AD 96-06-04Published 1996-03-21Effective 1996-04-25

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires an inspection of the main transmission input driveshaft assembly (driveshaft) at intervals of 300 hours time-in-service (TIS); the application of a zinc chromate primer inspection visual aid; and, daily visual checks of the driveshaft.

Supersedes an earlier directive that is not in our index. See the official text.

Why this AD
Prompted by recent studies that indicate self-adhesive temperature indicators are a more reliable means of detecting overheat conditions on grease-lubricated couplings than the zinc chromate primers currently in use.
Compliance
Repetitive inspection or action, per the Federal Register abstract. The official rule sets the intervals.
Applies to
Bell Helicopter Textron, A Division of Textron Canada, Ltd. Model 206A and 206B Helicopters · 1 model in our index, listed below
Full official abstract

This amendment supersedes an existing airworthiness directive (AD), applicable to Bell Helicopter Textron, A Division of Textron Canada, Ltd., (BHTC) Model 206A and 206B helicopters, that currently requires an inspection of the main transmission input driveshaft assembly (driveshaft) at intervals of 300 hours time-in-service (TIS); the application of a zinc chromate primer inspection visual aid; and, daily visual checks of the driveshaft. This amendment requires inspections of the driveshaft at intervals of 300 hours TIS; the application of a self-adhesive temperature indicator visual inspection aid; and, preflight visual owner/operator (pilot) checks of the driveshaft. This amendment is prompted by recent studies that indicate self-adhesive temperature indicators are a more reliable means of detecting overheat conditions on grease-lubricated couplings than the zinc chromate primers currently in use. The actions specified by this AD are intended to prevent failure of the driveshaft due to coupling wear or overheating, which could result in loss of power to the main rotor and a subsequent forced emergency landing.

More directives for Bell 206 JetRanger / LongRanger

  1. AD 2023-06-05 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2023-05-19
  2. AD 2022-22-08 Airworthiness Directives; Bell Textron Canada Limited (Type Certificate ... Effective 2022-12-23
  3. AD 2022-20-04 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-12-23
  4. AD 2021-26-08 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-01-27
  5. AD 2021-24-15 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2022-01-18

All Bell 206 JetRanger / LongRanger directives

Applies to 1 model in our index

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.