Airworthiness Directive

AD 96-12-07 61 FR 29934

Federal Aviation Administration · 14 CFR part 39

Requires inspections for wear, and replacement, if necessary, of the impulse coupling assemblies.

FR document
96-14869
Amendment
39-9649
Published
1996-06-13
Effective
1996-07-18
Status
Not determined in this index
Model coverage
Not mapped in this index

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

96-12-07

FR doc 96-14869 · 61 FR 29934

AD 96-12-07Published 1996-06-13Effective 1996-07-18

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires inspections for wear, and replacement, if necessary, of the impulse coupling assemblies.

Supersedes an earlier directive that is not in our index. See the official text.

Why this AD
Prompted by the availability of an improved design for the impulse coupling assembly.
Applies to
Teledyne Continental Motors (formerly Bendix) S-20, S-1200, D-2000, and D-3000 Series Magnetos · not mapped to a model page in our index
Bulletins it references
MSB645

This AD cites MSB645 — the actions in that bulletin are required by this AD, the controlling document. Read the bulletin.

Federal Register abstract

Summary (Federal Register abstract). This is the abstract the FAA published with the rule. It is not the rule's legal applicability; the official rule states that, including any part, serial-number, configuration and exception conditions.

This amendment supersedes an existing airworthiness directive (AD), applicable to Teledyne Continental Motors (TCM) (formerly Bendix) S-20, S-1200, D-2000, and D-3000 series magnetos equipped with impulse couplings, that currently requires inspections for wear, and replacement, if necessary, of the impulse coupling assemblies. This amendment requires replacement, if necessary, of worn riveted impulse coupling assemblies with serviceable riveted impulse couplings or snap ring impulse couplings. This amendment is prompted by the availability of an improved design for the impulse coupling assembly. The actions specified by this AD are intended to prevent magneto failure and subsequent engine failure.

Model coverage: not mapped in this index

This record is listed from the Federal Register. We have not mapped it to any aircraft or engine model page, so no model page lists it. Check the official rule for exactly which products it applies to.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.