Airworthiness Directive

AD 96-25-02 61 FR 64270 Active

Federal Aviation Administration · 14 CFR part 39

Requires revising the Limitations Section, the Procedures Section, and the Master Minimum Equipment List (MMEL) of the Airplane Flight Manual (AFM).

FR document
96-30700
Amendment
39-9843
Published
1996-12-04
Effective
1996-12-27
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

96-25-02

FR doc 96-30700 · 61 FR 64270

AD 96-25-02Published 1996-12-04Effective 1996-12-27

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires revising the Limitations Section, the Procedures Section, and the Master Minimum Equipment List (MMEL) of the Airplane Flight Manual (AFM).

Full official abstract

This amendment adopts a new airworthiness directive (AD) that applies to Mitsubishi Heavy Industries, LTD. Models MU-2B-10, -15, -20, -25, -26, -26A, -30, -35, -36, -36A, -40, and -60 airplanes. This action requires revising the Limitations Section, the Procedures Section, and the Master Minimum Equipment List (MMEL) of the Airplane Flight Manual (AFM). These revisions require establishing a minimum airspeed for sustained level flight in icing conditions, limitations for the use of flaps for flight in icing conditions, cues for recognizing hazardous conditions, exiting procedures in icing conditions that are specific to Mitsubishi MU-2B series airplanes, and ensuring the wing illumination and taxi lights are operable prior to flight at night into known or forecast icing conditions. Several fatal accidents, involving certain Mitsubishi MU-2B series airplanes while flying in icing conditions, prompted this action. The actions specified by this AD are intended to prevent operating in conditions that are beyond the capability of the icing protection system, prevent aerodynamic stall at higher than normal airspeed because of icing conditions, and immediately provide the pilot with cues for recognizing hazardous conditions and exiting these conditions, which if not followed, could result in loss of the airplane.

More directives for Mitsubishi MU-2

  1. AD 2020-26-14 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes Effective 2021-02-02
  2. AD 2016-08-19 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes Effective 2016-06-06
  3. AD 2015-01-02 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes Effective 2015-02-26
  4. AD 2010-10-17 Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Various Mode... Effective 2010-07-22
  5. AD 2007-17-09 Airworthiness Directives; Mitsubishi Heavy Industries MU-2B Series Airpl... Effective 2007-09-25

All Mitsubishi MU-2 directives

Applies to 1 model in our index