AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 98-11-22 63 FR 29545 Active

Federal Aviation Administration · 14 CFR part 39

Requires a one-time inspection to detect discrepancies of certain diode mounting assemblies on specified electrical panels; follow-on actions; and repair or replacement with serviceable components, if necessary.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
98-14026
Amendment
39-10547
Published
1998-06-01
Effective
1998-07-06
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/98-11-22 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

98-11-22

FR doc 98-14026 · 63 FR 29545

AD 98-11-22Published 1998-06-01Effective 1998-07-06

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires a one-time inspection to detect discrepancies of certain diode mounting assemblies on specified electrical panels; follow-on actions; and repair or replacement with serviceable components, if necessary.

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to all Short Brothers Model SD3-60 series airplanes, that requires a one-time inspection to detect discrepancies of certain diode mounting assemblies on specified electrical panels; follow-on actions; and repair or replacement with serviceable components, if necessary. This amendment is prompted by issuance of mandatory continuing airworthiness information by a foreign civil airworthiness authority. The actions specified by this AD are intended to prevent overheating and possible failure of certain electrical diodes, which could result in loss of electrical service to one or more airplane electrical circuits.

More directives for Shorts SD3-30 / SD3-60

  1. AD 2010-24-06 Airworthiness Directives; Short Brothers PLC Model SD3 Airplanes Effective 2011-02-16
  2. AD 2008-16-09 R1 Airworthiness Directives; Short Brothers Model SD3-60 Airplanes Effective 2009-09-16
  3. AD 2008-16-09 Airworthiness Directives; Short Brothers Model SD3-60 Airplanes Effective 2008-09-15
  4. AD 2008-12-08 Airworthiness Directives; Short Brothers Model SD3-60 Airplanes Equipped... Effective 2008-07-15
  5. AD 2007-08-09 Airworthiness Directives; Short Brothers Model SD3-60 SHERPA, SD3-SHERPA... Effective 2007-05-08

All Shorts SD3-30 / SD3-60 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index