Airworthiness Directive

AD 98-13-04 63 FR 32720 Active

Federal Aviation Administration · 14 CFR part 39

Requires repetitively inspecting the airbrakes to assure they retract at their outboard end first, and repairing the airbrakes if they do not retract at their outboard end first; and repetitively inspecting the airbrake torque…

FR document
98-15894
Published
1998-06-16
Effective
1998-08-02
Models covered
1

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

98-13-04

FR doc 98-15894 · 63 FR 32720

AD 98-13-04Published 1998-06-16Effective 1998-08-02

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitively inspecting the airbrakes to assure they retract at their outboard end first, and repairing the airbrakes if they do not retract at their outboard end first; and repetitively inspecting the airbrake torque tube in the fuselage for cracks or deformations, and reinforcing or replacing, as necessary, if cracks or deformations are found in the airbrake torque tube.

Compliance
Repetitive inspection or action, per the Federal Register abstract. The official rule sets the intervals.
Applies to
Glaser-Dirks Flugzeugbau GmbH Models DG-100 and DG-400 Gliders · 1 model in our index, listed below
Full official abstract

This amendment adopts a new airworthiness directive (AD) that applies to all Glaser-Dirks Flugzeugbau GmbH (Glaser-Dirks) Models DG- 100 and DG-400 gliders. This AD requires repetitively inspecting the airbrakes to assure they retract at their outboard end first, and repairing the airbrakes if they do not retract at their outboard end first; and repetitively inspecting the airbrake torque tube in the fuselage for cracks or deformations, and reinforcing or replacing, as necessary, if cracks or deformations are found in the airbrake torque tube. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. The actions specified by this AD are intended to prevent overloading of the airbrake control system caused by free play between the bellcrank and airbrake plate, which could result in failure of the operating lever of the airbrake torque tube in the fuselage.

More directives for DG Flugzeugbau

  1. AD 2026-07-03 Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously ... Effective 2026-04-20
  2. AD 2025-13-08 Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously ... Effective 2025-07-25
  3. AD 2024-19-12 Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously ... Effective 2024-10-15
  4. AD 2023-03-22 Airworthiness Directives; DG Flugzeugbau GmbH and Schempp-Hirth Flugzeug... Effective 2023-04-05
  5. AD 2022-04-01 Airworthiness Directives; DG Flugzeugbau GmbH and Schempp-Hirth Flugzeug... Effective 2022-03-29

All DG Flugzeugbau directives

Applies to 1 model in our index

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.