de Havilland DHC-1 Chipmunk

Airworthiness Directives; Robert E. Rust, Jr. Model DeHavilland DH.C1 Chipmunk 21, DH.C1 Chipmunk 22, and DH.C1 Chipmunk 22A Airplanes

We are adopting a new airworthiness directive (AD) for all Robert E. Rust, Jr. Models DeHavilland DH.C1 Chipmunk 21, DH.C1 Chipmunk 22, and DH.C1 Chipmunk 22A airplanes. This AD requires you to do a one-time inspection of the flap operating system for an unapproved latch plate design installation, with replacement as necessary. This AD results from a report of a latch plate failing in service that was not made in accordance with the applicable de Havilland drawing. We are issuing this AD to detect and correct an unauthorized latch plate design installation which could result in an un-commanded retraction of the flaps. This failure could lead to a stall during a landing approach.

Airworthiness Directives; Robert E. Rust Models DeHavilland DH.C1 Chipmunk 21, 22, and 22A Airplanes

This amendment adopts a new airworthiness directive (AD) that applies to certain Robert E. Rust (R.E. Rust) Models DeHavilland DH.C1 Chipmunk 21, 22, and 22A airplanes. This AD requires you to repetitively inspect the tailplane attachment brackets and replace each bracket at a specified time. This AD also requires you to repetitively inspect each joint of the port and starboard engine mount frame and the rear upper mount frame tubes for cracks and/or damage and repair any cracks and/or damage found. This AD is the result of reports of stress corrosion cracking found on the tailplane attachment brackets and fatigue cracking and chaffing of the engine mount frame. The actions specified by this AD are intended to prevent failure of the tailplane attachment brackets caused by stress corrosion cracking and failure of the engine mount, which could result in loss of the tail section and separation of the engine from the airplane respectively. Such failures could lead to loss of control of the airplane.

Airworthiness Directives; Robert E. Rust Models DeHavilland DH.C1 Chipmunk 21, 22, and 22A Airplanes

This amendment adopts a new airworthiness directive (AD) that applies to certain Robert E. Rust (R.E. Rust) Models DeHavilland DH.C1 Chipmunk 21, 22, and 22A airplanes. This AD requires you to check the airplane logbook to determine whether certain modifications have been incorporated on the airplane and incorporate the modifications that have not already been accomplished. This AD is the result of the manufacturer performing a design study on the structural integrity of certain parts and reports of service failure of other parts installed on the affected airplanes. The actions specified by this AD are intended to prevent reduced structural integrity in the primary structure of the airplane, which could result in failure of the rudder torque tube, elevator fasteners, and the vertical fin rear spar, or jamming or damage to the elevator. Such failures could lead to loss of control of the airplane.

Airworthiness Directives; Robert E. Rust Models DeHavilland DH.C1 Chipmunk 21, 22, and 22A Airplanes

This amendment adopts a new airworthiness directive (AD) that applies to certain Robert E. Rust (R.E. Rust) Models DeHavilland DH.C1 Chipmunk 21, 22, and 22A airplanes. This AD requires you to inspect the fuselage to determine if a steel fuselage center-section tie bar fitted with bushings in the end lug bolt holes is installed. If this bushed steel fuselage center-section tie bar is installed, this AD decreases the safe life limit. This AD is the result of reports that certain replacement steel fuselage center-section tie bars installed on the affected airplanes could fail before the originally published safe life limit. The actions specified by this AD are intended to prevent early failure of these bushed steel fuselage center-section tie bars, which could result in reduced structural integrity of the wings. Such a condition could lead to loss of control of the airplane.