AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2004-03-28 69 FR 6546 Active

Federal Aviation Administration · 14 CFR part 39

Requires a one-time inspection to determine the serial numbers of the elevator and aileron servos of the drive assemblies of the automatic flight control system, and follow-on corrective actions if necessary.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
04-2681
Amendment
39-13472
Published
2004-02-11
Effective
2004-03-17
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2004-03-28 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2004-03-28

FR doc 04-2681 · 69 FR 6546

AD 2004-03-28Published 2004-02-11Effective 2004-03-17

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires a one-time inspection to determine the serial numbers of the elevator and aileron servos of the drive assemblies of the automatic flight control system, and follow-on corrective actions if necessary.

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to certain Bombardier Model DHC-8-102, -103, -106, -201, - 202, -301, -311, and -315 airplanes, that requires a one-time inspection to determine the serial numbers of the elevator and aileron servos of the drive assemblies of the automatic flight control system, and follow-on corrective actions if necessary. This action is necessary to prevent separation of the screws from the autopilot clutch assembly of the SM-300 servo, which could result in uncommanded engagement of the autopilot servo and consequent reduced controllability of the airplane. This action is intended to address the identified unsafe condition.

More directives for de Havilland DHC-8 Dash 8

  1. AD 2026-11-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-07-09
  2. AD 2026-08-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-06-03
  3. AD 2025-19-05 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-10-31
  4. AD 2025-05-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-04-16
  5. AD 2024-22-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2024-12-31

All de Havilland DHC-8 Dash 8 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index