AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2004-15-19 69 FR 45573 Active

Federal Aviation Administration · 14 CFR part 39

Requires you to inspect (one-time) for the existence of any protective cover over the percussion caps or silicon tube installed over the end of the trigger mechanism pin of the oxygen generators, and remove any protective cover…

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
04-17218
Amendment
39-13753
Published
2004-07-30
Effective
2004-09-13
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2004-15-19 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2004-15-19

FR doc 04-17218 · 69 FR 45573

AD 2004-15-19Published 2004-07-30Effective 2004-09-13

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to inspect (one-time) for the existence of any protective cover over the percussion caps or silicon tube installed over the end of the trigger mechanism pin of the oxygen generators, and remove any protective cover or silicon tube found.

Full official abstract

The FAA adopts a new airworthiness directive (AD) for certain the New Piper Aircraft, Inc. (Piper) Model PA-46-500TP airplanes. This AD requires you to inspect (one-time) for the existence of any protective cover over the percussion caps or silicon tube installed over the end of the trigger mechanism pin of the oxygen generators, and remove any protective cover or silicon tube found. This AD is the result of reports of the above conditions found on the affected airplanes. We are issuing this AD to detect and remove any protective cover over the percussion cap, or any silicon tube over the end of the trigger mechanism pin, which could result in failure of the emergency oxygen system. This failure could lead to the crew and passengers not being able to get oxygen in an emergency situation.

More directives for Piper PA-46 Malibu/Mirage

  1. AD 2023-25-02 Airworthiness Directives; Piper Aircraft, Inc. Airplanes Effective 2023-12-19
  2. AD 2022-11-10 Airworthiness Directives; Piper Aircraft, Inc. Airplanes Effective 2022-06-27
  3. AD 2021-09-02 Airworthiness Directives; Piper Aircraft, Inc. Airplanes Effective 2021-04-16
  4. AD 2021-04-07 Airworthiness Directives; Piper Aircraft, Inc. Airplanes Effective 2021-03-30
  5. AD 2019-12-12 Airworthiness Directives; Piper Aircraft, Inc. Effective 2019-07-12

All Piper PA-46 Malibu/Mirage directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index