AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2005-03-04 70 FR 5365 Active

Federal Aviation Administration · 14 CFR part 39

Requires you to replace any type TLP-D or TLED rivets on the aileron pushrod ends and elevator control pushrod ends.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
05-1723
Amendment
39-13960
Published
2005-02-02
Effective
2005-03-21
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2005-03-04 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2005-03-04

FR doc 05-1723 · 70 FR 5365

AD 2005-03-04Published 2005-02-02Effective 2005-03-21

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to replace any type TLP-D or TLED rivets on the aileron pushrod ends and elevator control pushrod ends.

Full official abstract

The FAA adopts a new airworthiness directive (AD) for all Pacific Aerospace Corporation, Ltd. (Pacific Aerospace) Model 750XL airplanes. This AD requires you to replace any type TLP-D or TLED rivets on the aileron pushrod ends and elevator control pushrod ends. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for New Zealand. We are issuing this AD to replace the above identified rivets on the aileron pushrod ends and elevator control pushrod ends, which, if not replaced, could result in loose mechanical elements in the control systems. This could lead to control anomalies and loss of airplane control.

More directives for Pacific Aerospace 750XL/FU24

  1. AD 2021-23-16 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2022-01-11
  2. AD 2021-23-19 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2022-01-11
  3. AD 2021-21-11 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2021-12-10
  4. AD 2021-21-10 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2021-12-10
  5. AD 2021-20-20 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2021-11-22

All Pacific Aerospace 750XL/FU24 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index