AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2005-11-07 70 FR 32990 Active

Federal Aviation Administration · 14 CFR part 39

Requires you to seal with firewall sealant the gaps between the bottom fuselage cover (belly fairing) and the firewall and repeat the sealing procedure whenever you install the bottom fuselage cover (belly fairing).

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
05-11041
Amendment
39-14109
Published
2005-06-07
Effective
2005-07-18
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2005-11-07 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2005-11-07

FR doc 05-11041 · 70 FR 32990

AD 2005-11-07Published 2005-06-07Effective 2005-07-18

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to seal with firewall sealant the gaps between the bottom fuselage cover (belly fairing) and the firewall and repeat the sealing procedure whenever you install the bottom fuselage cover (belly fairing).

Full official abstract

The FAA adopts a new airworthiness directive (AD) for certain Extra Flugzeugproduktions-und Vertriebs-GmbH (EXTRA) Models EA-300, EA- 300S, EA-300L, and EA-300/200 airplanes. This AD requires you to seal with firewall sealant the gaps between the bottom fuselage cover (belly fairing) and the firewall and repeat the sealing procedure whenever you install the bottom fuselage cover (belly fairing). This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this AD to prevent fuel from flowing behind the firewall in the case of a fuel leak. This could result in an in-flight fire, which could cause loss of the airplane and crew.

More directives for Extra EA-300

  1. AD 2010-04-11 Airworthiness Directives; Extra Flugzeugproduktions- und Vertriebs- GmbH... Effective 2010-03-30
  2. AD 2007-02-11 Airworthiness Directives; EXTRA Flugzeugproduktions-und Vertriebs-GmbH M... Effective 2007-02-28
  3. AD 2005-01-17 Airworthiness Directives; EXTRA Flugzeugbau GmbH Model EA-300 and EA-300... Effective 2005-02-28
  4. AD 2003-17-02 Airworthiness Directives; EXTRA Flugzeugbau GmbH Models EA-300/200, EA-3... Effective 2003-10-10
  5. AD 2002-21-11 Airworthiness Directives; EXTRA Flugzeugbau GmbH Model EA-300S Airplanes Effective 2002-12-17

All Extra EA-300 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index