Correction notice

AD 2006-01-11 R1 71 FR 13538 Correction

Federal Aviation Administration · 14 CFR part 39

Requires the installation of a pilot assist handle and deicing boots on the cargo pod and landing gear fairings; and the incorporation of changes to the Pilot's Operating Handbook (POH) and FAA-Approved Airplane Flight Manual (AFM).

FR document
06-2546
Published
2006-03-16
Effective
2006-02-22
Models covered
1

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Correction

2006-01-11 R1

FR doc 06-2546 · 71 FR 13538

AD 2006-01-11 R1Published 2006-03-16Effective 2006-02-22

Requires the installation of a pilot assist handle and deicing boots on the cargo pod and landing gear fairings; and the incorporation of changes to the Pilot's Operating Handbook (POH) and FAA-Approved Airplane Flight Manual (AFM).

Full official abstract

This document clarifies the intent of AD 2006-01-11, which was published in the Federal Register on January 12, 2006 (71 FR 1941). AD 2006-01-11 applies to Cessna Models 208 and 208B airplanes and requires the installation of a pilot assist handle and deicing boots on the cargo pod and landing gear fairings; and the incorporation of changes to the Pilot's Operating Handbook (POH) and FAA-Approved Airplane Flight Manual (AFM). The compliance time for the AFM/POH change currently reads "prior to further flight" after the installation of the pilot assist handle, which is required within 125 days after the effective date. The AFM/POH change is related to operation in ground icing conditions and should not be attributed to the pilot assist handle installation. Therefore, the compliance time should also be within 125 days after the effective date. Additionally, the requirement of installing the accessory kit or installing a placard should only apply to those airplanes equipped with a cargo pod and pneumatic deicing boots. The way it currently is written makes it apply to all airplanes equipped with pneumatic deicing boots. This AD action rewords the compliance time and the wording for the installation or placard requirement to reflect the above concerns.

More directives for Cessna 208 Caravan

  1. AD 2021-04-10 Airworthiness Directives; Textron Aviation, Inc. Airplanes Effective 2021-04-12
  2. AD 2009-15-05 Airworthiness Directives; Cessna Aircraft Company Models 208 and 208B Ai... Effective 2009-07-27
  3. AD 2009-05-12 Airworthiness Directives; Cessna Aircraft Company Models 208 and 208B Ai... Effective 2009-04-15
  4. AD 2008-26-10 Airworthiness Directives; Cessna Aircraft Company 172, 175, 177, 180, 18... Effective 2009-01-05
  5. AD 2008-13-06 Airworthiness Directives; Cessna Aircraft Company Models 208 and 208B Ai... Effective 2008-07-30

All Cessna 208 Caravan directives

This is a correction notice. The AD it corrects is not in our index yet, so we are showing the correction alone rather than implying we hold the directive itself.

Applies to 1 model in our index

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.