AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2007-04-01 72 FR 6931 Active

Federal Aviation Administration · 14 CFR part 39

Requires actions to correct the unsafe condition on these products.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
E7-2318
Amendment
39-14932
Published
2007-02-14
Effective
2007-03-21
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2007-04-01 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2007-04-01

FR doc E7-2318 · 72 FR 6931

AD 2007-04-01Published 2007-02-14Effective 2007-03-21

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires actions to correct the unsafe condition on these products.

1 correction to this AD FAA · 2007-03-08

Correction published 2007-03-08

Issued by
Federal Aviation Administration
Published
2007-03-08
Document
Federal Register E7-4130 · Final rule; correction
Corrects
the version published February 14, 2007 at 72 FR 6931

This document makes a correction to Airworthiness Directive (AD) 2007-04-01, which was published in the Federal Register on February 14, 2007 (72 FR 6931), and applies to certain Pacific Aerospace Corporation Ltd Model 750XL airplanes. AD 2007-04-01 requires that you inspect the rivets in the fuselage roof at STN 180.85, BL 19.67, WL 86.2, and replace undersize rivets. Current language in Sec. 39.13 [Amended] of AD 2007-04-01 references "* * *" instead of "2007-04-01." This document corrects that paragraph by changing the reference from "* * *" to "2007-04-01."

A correction restates part of an AD that was published incorrectly. It is not an additional requirement and it does not change the AD number or its effective date.

Source: Federal Register document E7-4130, retrieved 2026-08-17

Read this correction on Federal Register (opens in a new tab)
Full official abstract

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as possible installation of undersize rivets in the fuselage roof at STN 180.85, BL 19.67, WL 86.2. We are issuing this AD to require actions to correct the unsafe condition on these products.

More directives for Pacific Aerospace 750XL/FU24

  1. AD 2021-23-16 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2022-01-11
  2. AD 2021-23-19 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2022-01-11
  3. AD 2021-21-11 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2021-12-10
  4. AD 2021-21-10 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2021-12-10
  5. AD 2021-20-20 Airworthiness Directives; Pacific Aerospace Limited Airplanes Effective 2021-11-22

All Pacific Aerospace 750XL/FU24 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index