Airworthiness Directive

AD 2007-04-19 72 FR 8089 Superseded

Federal Aviation Administration · 14 CFR part 39

Requires removing from service certain SAP part numbered (P/N) cast cylinder assemblies installed in TCM, LE, and AL reciprocating engines.

FR document
E7-2985
Amendment
39-14951
Published
2007-02-23
Effective
2007-03-12
Model coverage
3 models if a part is installed

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

2007-04-19

FR doc E7-2985 · 72 FR 8089

AD 2007-04-19Published 2007-02-23Effective 2007-03-12

Revised by 2007-04-19 R1

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires removing from service certain SAP part numbered (P/N) cast cylinder assemblies installed in TCM, LE, and AL reciprocating engines.

Why this AD
Results from nine separated SAP cylinder assemblies in TCM reciprocating engines and one in LE reciprocating engines.
Applies to
Superior Air Parts, Inc. (SAP), Cast Cylinder Assemblies Part Numbers Series: SA47000L, SA47000S, SA52000, SA55000, SL32000W, SL32000WH, SL32006W, SL36000TW, SL36000W, and SL36006W
Revised by
2007-04-19 R1
Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain SAP cast cylinder assemblies installed in Teledyne Continental Motors (TCM) 470, 520, and 550 series reciprocating engines, Lycoming Engines (LE) 320, 360, and 540 series reciprocating engines, Avco Lycoming (AL) 540 series reciprocating engines, and Superior Air Parts, Inc. (SAP) 360 series reciprocating engines. This AD requires removing from service certain SAP part numbered (P/N) cast cylinder assemblies installed in TCM, LE, and AL reciprocating engines. This AD also requires removing from service certain cast cylinder assemblies installed as original equipment in SAP reciprocating engines, or in certain overhauled or repaired SAP reciprocating engines. This AD results from nine separated SAP cylinder assemblies in TCM reciprocating engines and one in LE reciprocating engines. We are issuing this AD to prevent cylinder separation that can lead to engine failure, a possible engine compartment fire, and damage to the airplane.

Applies if a named part is installed: 3 models in our index

This directive names a part, appliance, propeller or supplemental type certificate rather than these models. It applies to one of them only when the affected item is installed; the official rule says which parts, serial numbers and dates.

Condition: Only with Superior Air Parts cast cylinder assemblies P/N SA47000L, SA47000S, SA52000 or SA55000 series (listed in the AD) installed.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.