Airworthiness Directive

AD 2007-05-15 72 FR 10918 Active

Federal Aviation Administration · 14 CFR part 39

Requires initial and repetitive visual inspections of the starter adapter assembly and crankshaft gear and unscheduled visual inspections of the starter adapter assembly and crankshaft gear due to a rough-running engine.

FR document
E7-3832
Amendment
39-14976
Published
2007-03-12
Effective
2007-04-16
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2007-05-15

FR doc E7-3832 · 72 FR 10918

AD 2007-05-15Published 2007-03-12Effective 2007-04-16

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires initial and repetitive visual inspections of the starter adapter assembly and crankshaft gear and unscheduled visual inspections of the starter adapter assembly and crankshaft gear due to a rough-running engine.

Supersedes an earlier directive. See the official text.

Full official abstract

The FAA is superseding an existing airworthiness directive (AD) for Teledyne Continental Motors (TCM) GTSIO-520 series reciprocating engines. That AD currently requires initial and repetitive visual inspections of the starter adapter assembly and crankshaft gear and unscheduled visual inspections of the starter adapter assembly and crankshaft gear due to a rough-running engine. That AD also requires replacement of the starter adapter shaft gear needle bearing with a certain bushing and installation of a certain TCM service kit at the next engine overhaul, or at the next starter adapter replacement, whichever occurs first. This AD requires performing the inspection ordered in paragraph (h) of this AD every 100 hours time-in- service (TIS), or annually. This proposed AD results from an error discovered in AD 2005-20-04. We are issuing this AD to failure of the starter adapter assembly and or crankshaft gear, resulting in failure of the engine and possible forced landing.

More directives for Continental IO-520

  1. AD 2023-17-04 Airworthiness Directives; Continental Aerospace Technologies, Inc. Engin... Effective 2023-10-26
  2. AD 2023-05-16 Airworthiness Directives; Continental Aerospace Technologies, Inc., Reci... Effective 2023-03-15
  3. AD 2023-04-08 Airworthiness Directives; Continental Aerospace Technologies, Inc. Recip... Effective 2023-02-23
  4. AD 2023-02-12 Airworthiness Directives; Continental Aerospace Technologies, Inc. Recip... Effective 2023-02-17
  5. AD 2022-16-03 Airworthiness Directives; Continental Aerospace Technologies, Inc., Lyco... Effective 2022-08-15

All Continental IO-520 directives

Applies to 1 model in our index