Airworthiness Directive

AD 2009-26-11 75 FR 3127 Active

Federal Aviation Administration · 14 CFR part 39

Requires repetitive inspections of the 1/4-inch and 5/16-inch bolt hole areas on the wing front lower spar caps for fatigue cracking; replacement or repair of any wing front lower spar cap where fatigue cracks are found; and…

FR document
2010-594
Amendment
39-16150
Published
2010-01-20
Effective
2010-02-24
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2009-26-11

FR doc 2010-594 · 75 FR 3127

AD 2009-26-11Published 2010-01-20Effective 2010-02-24

Supersedes 2006-07-15

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitive inspections of the 1/4-inch and 5/16-inch bolt hole areas on the wing front lower spar caps for fatigue cracking; replacement or repair of any wing front lower spar cap where fatigue cracks are found; and reporting of any fatigue cracks found to the FAA.

Full official abstract

We are adopting a new airworthiness directive (AD) to supersede AD (AD) 2006-07-15, which applies to Thrush Aircraft, Inc. Model 600 S2D and S2R (S-2R) series airplanes (type certificate previously held by Quality Aerospace, Inc. and Ayres Corporation). AD 2006-07-15 currently requires repetitive inspections of the 1/4-inch and 5/16-inch bolt hole areas on the wing front lower spar caps for fatigue cracking; replacement or repair of any wing front lower spar cap where fatigue cracks are found; and reporting of any fatigue cracks found to the FAA. AD 2006-07-15 also puts the affected airplanes into groups for compliance time and applicability purposes. Since we issued AD 2006-07-15, FAA analysis reveals that inspections are not detecting all existing cracks and shows the incidences of undetected cracks will increase as the airplanes age. Consequently, this AD retains the actions of AD 2006-07-15 and imposes a life limit on the wing front lower spar caps that requires replacement of the wing front lower spar caps when the life limit is reached. This AD also changes the requirements and applicability of the groups discussed above and removes the ultrasonic inspection method. We are issuing this AD to prevent wing front lower spar cap failure caused by undetected fatigue cracks. Such failure could result in loss of a wing in flight.

More directives for Thrush S2R

  1. AD 2007-26-01 Airworthiness Directives; Thrush Aircraft, Inc. Model S2R Series Airplan... Effective 2008-01-22
  2. AD 2006-07-15 Airworthiness Directives; Thrush Aircraft, Inc. Model 600 S2D and S2R (S... Effective 2006-04-18
  3. AD 2003-07-01 Airworthiness Directives; Quality Aerospace, Inc. S2R Series and Model 6... Effective 2003-05-20
  4. AD 2000-15-10 Airworthiness Directives; McCauley Propeller Model 4HFR34C653/L106FA-0 Effective 2000-08-23
  5. AD 2000-11-16 Airworthiness Directives; Ayres Corporation S2R Series and Model 600 S2D... Effective 2000-07-25

All Thrush S2R directives

Applies to 1 model in our index