2013-20-03
FR doc 2013-24035 · 78 FR 65206AD 2013-20-03Published 2013-10-31Effective 2013-12-05
Requires installing a placard on the instrument panel and revising the limitations section of the rotorcraft flight manual (RFM).
- Why this AD
- Prompted by several incidents of third stage engine turbine wheel failures, which were caused by excessive vibrations at certain engine speeds during steady- state operations.
- Applies to
- Bell Helicopter Textron Canada Limited (Bell) Helicopters · 1 model in our index, listed below
Full official abstract
We are adopting a new airworthiness directive (AD) for certain Bell Model 430 helicopters. This AD requires installing a placard on the instrument panel and revising the limitations section of the rotorcraft flight manual (RFM). This AD was prompted by several incidents of third stage engine turbine wheel failures, which were caused by excessive vibrations at certain engine speeds during steady- state operations. These actions are intended to alert pilots to avoid certain engine speeds during steady-state operations, prevent failure of the third stage engine turbine, engine power loss, and subsequent loss of control of the helicopter.
More directives for Bell 430
- AD 2026-13-12 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2026-08-11
- AD 2025-09-03 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2025-05-13
- AD 2021-24-09 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2021-12-07
- AD 2021-19-01 Airworthiness Directives; Bell Textron Canada Limited Helicopters Effective 2021-10-13
- AD 2016-21-01 Airworthiness Directives; Bell Helicopter Textron Helicopters Effective 2016-11-18
