Airworthiness Directive

AD 2016-07-11 81 FR 18461 Active

Federal Aviation Administration · 14 CFR part 39

FR document
2016-07228
Amendment
39-18456
Published
2016-03-31
Effective
2016-04-15
Models covered
1
Last live check
2026-10-01
This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2016-07-11

FR doc 2016-07228 · 81 FR 18461

AD 2016-07-11Published 2016-03-31Effective 2016-04-15

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires visually inspecting the center and outer wing front spar lower hinge fittings for cracks and corrosion and taking all necessary corrective actions.

Full official abstract

We are adopting a new airworthiness directive (AD) for all Weatherly Aircraft Company Models 201, 201A, 201B, 201C, 620, 620A, 620B, 620B-TG, and 620TP airplanes. This AD requires visually inspecting the center and outer wing front spar lower hinge fittings for cracks and corrosion and taking all necessary corrective actions. This AD also requires sending the inspection results to the FAA. This AD was prompted by a report of cracks found on the center wing front spar lower hinge fitting. We are issuing this AD to correct the unsafe condition on these products.

More directives for Weatherly 201/620

  1. AD 2020-10-03 Airworthiness Directives; Weatherly Aircraft Company 2020-05-11
  2. AD 96-16-06 Airworthiness Directives; Weatherly Aviation Company, Inc., Models 620A ... 1996-09-18

All Weatherly 201/620 directives

Applies to 1 model in our index