AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2018-02-05 83 FR 3064 Active

Federal Aviation Administration · 14 CFR part 39

FR document
2018-01059
Amendment
39-19158
Published
2018-01-23
Effective
2018-02-07
Models covered
1
Last live check
2026-10-02

Printed from https://aircraftdirectives.com/ad/2018-02-05 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2018-02-05

FR doc 2018-01059 · 83 FR 3064

AD 2018-02-05Published 2018-01-23Effective 2018-02-07

Superseded by 2018-07-03

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires inspecting the fuel tank selector cover to verify the left and right fuel tank selector placards are located at the proper positions and replacing those that are improperly located with new placards.

Full official abstract

We are adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc. Models PA-28-140, PA-28-150, PA-28-151, PA-28-160, PA-28-161, PA-28-180, PA-28-181, PA-28-236, PA-28-201T, PA-28R-180, PA-28R-200, PA-28R-201, PA-28R-201T, PA-28RT-201, and PA-28RT-201T airplanes. This AD requires inspecting the fuel tank selector cover to verify the left and right fuel tank selector placards are located at the proper positions and replacing those that are improperly located with new placards. This AD was prompted by a quality control issue at the manufacturer that resulted in the installation of the fuel tank selector covers with the left and right fuel tank selector placards improperly located. We are issuing this AD to address the unsafe condition on these products.

More directives for Piper PA-28

  1. AD 2024-10-04 Airworthiness Directives; Piper Aircraft, Inc. Airplanes 2024-05-22
  2. AD 2020-26-16 Airworthiness Directives; Piper Aircraft, Inc. Airplanes 2021-01-15
  3. AD 2020-24-05 Airworthiness Directives; Piper Aircraft, Inc. Airplanes 2020-11-23
  4. AD 2018-07-03 Airworthiness Directives; Piper Aircraft, Inc. 2018-04-05
  5. AD 2017-14-04 Airworthiness Directives; Piper Aircraft, Inc. Airplanes 2017-07-11

All Piper PA-28 directives

View on Federal Register (opens in a new tab) Search DRS manually for AD 2018-02-05 (opens in a new tab)

Applies to 1 model in our index