Airworthiness Directive

AD 2018-22-03 83 FR 53563 Active

Federal Aviation Administration · 14 CFR part 39

Requires modifying the airplane by installing a sealing disk to a certain location and replacing certain barrel nuts.

FR document
2018-23031
Published
2018-10-24
Effective
2018-11-28
Models covered
1

Last live check: 2026-11-14

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

2018-22-03

FR doc 2018-23031 · 83 FR 53563

AD 2018-22-03Published 2018-10-24Effective 2018-11-28

Supersedes 2016-24-03

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires modifying the airplane by installing a sealing disk to a certain location and replacing certain barrel nuts.

Why this AD
Prompted by reports of cracked and corroded barrel nuts found at the mid-spar location of the horizontal-stabilizer-to-vertical-stabilizer attachment joint, and the issuance of new service information that includes a terminal modification.
Compliance
Repetitive inspection or action, per the Federal Register abstract. The official rule sets the intervals.
Applies to
Bombardier, Inc., Airplanes · 1 model in our index, listed below
Supersedes
2016-24-03
Full official abstract

We are superseding Airworthiness Directive (AD) 2016-24-03, which applied to certain Bombardier, Inc., Model DHC-8-400 series airplanes. AD 2016-24-03 required repetitive detailed inspections of barrel nuts and cradles, a check of the bolt torque of the preload indicating (PLI) washers, and corrective actions if necessary. This AD retains the requirements of AD 2016-24-03 and requires modifying the airplane by installing a sealing disk to a certain location and replacing certain barrel nuts. This AD was prompted by reports of cracked and corroded barrel nuts found at the mid-spar location of the horizontal-stabilizer-to-vertical-stabilizer attachment joint, and the issuance of new service information that includes a terminal modification. We are issuing this AD to address the unsafe condition on these products.

More directives for de Havilland DHC-8 Dash 8

  1. AD 2026-11-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-07-09
  2. AD 2026-08-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-06-03
  3. AD 2025-19-05 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-10-31
  4. AD 2025-05-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-04-16
  5. AD 2024-22-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2024-12-31

All de Havilland DHC-8 Dash 8 directives

Applies to 1 model in our index

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.