Airworthiness Directive

AD 2019-25-11 85 FR 443 Active

Federal Aviation Administration · 14 CFR part 39

Requires a one-time inspection of the wing lower skin under the drag angle at a certain WS to determine if a certain repair or modification has been accomplished; repetitive visual inspections of certain fuselage structures…

FR document
2019-28470
Amendment
39-21009
Published
2020-01-06
Effective
2020-02-10
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2019-25-11

FR doc 2019-28470 · 85 FR 443

AD 2019-25-11Published 2020-01-06Effective 2020-02-10

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires a one-time inspection of the wing lower skin under the drag angle at a certain WS to determine if a certain repair or modification has been accomplished; repetitive visual inspections of certain fuselage structures; repetitive eddy current inspections of the front spar along a certain WS reference line, the drag angle, and all fastener holes; repetitive structural gap checks of a certain surface; and corrective actions if necessary.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain Viking Air Limited Model CL-215-1A10 and CL-215-6B11 (CL-215T Variant) airplanes. This AD was prompted by reports of cracks on the wing lower skin under the drag angle at a certain wing station (WS). This AD requires a one-time inspection of the wing lower skin under the drag angle at a certain WS to determine if a certain repair or modification has been accomplished; repetitive visual inspections of certain fuselage structures; repetitive eddy current inspections of the front spar along a certain WS reference line, the drag angle, and all fastener holes; repetitive structural gap checks of a certain surface; and corrective actions if necessary. This AD also requires replacing certain rivets with certain fasteners, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Canadair CL-215 / CL-415

  1. AD 2023-07-10 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2023-06-20
  2. AD 2019-08-12 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2019-06-13
  3. AD 2019-02-05 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2019-03-22
  4. AD 2017-17-17 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2017-10-11
  5. AD 2017-15-14 Airworthiness Directives; Bombardier, Inc. (Type Certificate Previously ... Effective 2017-09-05

All Canadair CL-215 / CL-415 directives

Applies to 1 model in our index