AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2017-17-17 82 FR 42024 Active

Federal Aviation Administration · 14 CFR part 39

Prompted by the development of a terminating action for the repetitive inspections.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
2017-17838
Amendment
39-19007
Published
2017-09-06
Effective
2017-10-11
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2017-17-17 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2017-17-17

FR doc 2017-17838 · 82 FR 42024

AD 2017-17-17Published 2017-09-06Effective 2017-10-11

Supersedes 2011-03-08

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Prompted by the development of a terminating action for the repetitive inspections.

Full official abstract

We are superseding Airworthiness Directive (AD) 2011-03-08, which applied to certain Bombardier, Inc., Model CL-215-1A10 (CL-215), CL-215-6B11 (CL-215T Variant), and CL-215-6B11 (CL-415 Variant) airplanes. AD 2011-03-08 required an inspection to determine the number of flight cycles accumulated by certain accumulators installed on the airplane, and repetitive inspections of the accumulators for cracks, and replacement if necessary. This AD retains those inspections and the accumulator replacement if necessary, and adds a new terminating action to address the identified unsafe condition. This AD was prompted by the development of a terminating action for the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.

More directives for Canadair CL-215 / CL-415

  1. AD 2023-07-10 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2023-06-20
  2. AD 2019-25-11 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2020-02-10
  3. AD 2019-08-12 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2019-06-13
  4. AD 2019-02-05 Airworthiness Directives; Viking Air Limited (Type Certificate Previousl... Effective 2019-03-22
  5. AD 2017-15-14 Airworthiness Directives; Bombardier, Inc. (Type Certificate Previously ... Effective 2017-09-05

All Canadair CL-215 / CL-415 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index