AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2021-12-02 86 FR 31599 Active

Federal Aviation Administration · 14 CFR part 39

Prompted by a report that a number of nacelle A- frames were not manufactured in accordance with engineering drawings.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
2021-12435
Amendment
39-21589
Published
2021-06-15
Effective
2021-07-20
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/2021-12-02 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2021-12-02

FR doc 2021-12435 · 86 FR 31599

AD 2021-12-02Published 2021-06-15Effective 2021-07-20

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Prompted by a report that a number of nacelle A- frames were not manufactured in accordance with engineering drawings.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-400 series airplanes. This AD was prompted by a report that a number of nacelle A- frames were not manufactured in accordance with engineering drawings. This AD requires, depending on airplane configuration, removing the fasteners on the nacelle A-frame side brace sub-assemblies, doing an eddy current inspection for cracking, cold-working the holes, installing oversize fasteners, re-identifying the reworked side brace fitting and A-frame, and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for de Havilland DHC-8 Dash 8

  1. AD 2026-11-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-07-09
  2. AD 2026-08-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-06-03
  3. AD 2025-19-05 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-10-31
  4. AD 2025-05-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-04-16
  5. AD 2024-22-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2024-12-31

All de Havilland DHC-8 Dash 8 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index