2022-14-08
FR doc 2022-14971 · 87 FR 42061AD 2022-14-08Published 2022-07-14Effective 2022-08-18
Supersedes 2008-16-06
Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.
Requires the actions in AD 2008-16-06, and adds a requirement to install additional bonding leads around the crossfeed valve and accomplish a resistance check.
- Why this AD
- Prompted by a report that there is insufficient bonding of the crossfeed valve in the fuel tank area.
- Applies to
- BAE Systems (Operations) Limited Airplanes · 1 model in our index, listed below
- Supersedes
- 2008-16-06
Full official abstract
The FAA is superseding Airworthiness Directive (AD) 2008-16- 06, which applied to all BAE Systems (Operations) Limited Model 4101 airplanes. AD 2008-16-06 required the installation of additional bonding leads, inspection of existing bonding leads for defects, inspection of fuel system pipe runs in the wings to ensure appropriate clearances are maintained, and corrective actions. This AD continues to require the actions in AD 2008-16-06, and adds a requirement to install additional bonding leads around the crossfeed valve and accomplish a resistance check. This AD was prompted by a report that there is insufficient bonding of the crossfeed valve in the fuel tank area. The FAA is issuing this AD to address the unsafe condition on these products.
More directives for British Aerospace Jetstream 41
- AD 2025-16-03 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2025-09-18
- AD 2023-12-22 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2023-08-23
- AD 2023-02-06 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2023-03-14
- AD 2018-19-24 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2018-11-07
- AD 2018-19-30 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2018-11-02
