Airworthiness Directive

AD 2023-02-06 88 FR 7851 Superseded

Federal Aviation Administration · 14 CFR part 39

Requires the actions in ADs 2016-07-09 and 2018-19-24 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations.

FR document
2023-02526
Amendment
39-22313
Published
2023-02-07
Effective
2023-03-14
Models covered
1

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

2023-02-06

FR doc 2023-02526 · 88 FR 7851

AD 2023-02-06Published 2023-02-07Effective 2023-03-14

Superseded by 2025-16-03

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires the actions in ADs 2016-07- 09 and 2018-19-24 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations.

Supersedes an earlier directive. See the official text.

Why this AD
Prompted by a determination that new or more restrictive airworthiness limitations are necessary.
Compliance
Repetitive inspection or action, per the Federal Register abstract. The official rule sets the intervals.
Applies to
BAE Systems (Operations) Limited Airplanes · 1 model in our index, listed below
Superseded by
2025-16-03
Full official abstract

The FAA is superseding Airworthiness Directives (ADs) 2005-15- 11, 2016-07-09, and 2018-19-24, which applied to all BAE Systems (Operations) Limited Model 4101 airplanes. AD 2005-15-11 required repetitive detailed and specialized inspections to detect fatigue damage in the fuselage, replacement of certain bolt assemblies, and corrective actions if necessary. AD 2016-07-09 required a revision of the maintenance or inspection program, as applicable. AD 2018-19-24 required a one-time detailed inspection of a certain fuselage frame and repair, if necessary, and a revision of the maintenance or inspection program, as applicable, to incorporate new or revised maintenance instructions and airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in ADs 2016-07- 09 and 2018-19-24 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for British Aerospace Jetstream 41

  1. AD 2025-16-03 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2025-09-18
  2. AD 2023-12-22 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2023-08-23
  3. AD 2022-14-08 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2022-08-18
  4. AD 2018-19-24 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2018-11-07
  5. AD 2018-19-30 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2018-11-02

All British Aerospace Jetstream 41 directives

Applies to 1 model in our index

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.