AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2024-12-05 89 FR 58058 Active

Federal Aviation Administration · 14 CFR part 39

Requires the actions specified in AD 2021-25-12 and AD 2022-11-11 and requires replacement of the pivot pin and tow fitting assembly with a new, improved pivot pin and tow fitting assembly and prohibits the installation of affected parts.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
2024-15656
Amendment
39-22769
Published
2024-07-17
Effective
2024-08-21
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/2024-12-05 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2024-12-05

FR doc 2024-15656 · 89 FR 58058

AD 2024-12-05Published 2024-07-17Effective 2024-08-21

Supersedes 2021-25-12, 2022-11-11

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires the actions specified in AD 2021-25-12 and AD 2022-11-11 and requires replacement of the pivot pin and tow fitting assembly with a new, improved pivot pin and tow fitting assembly and prohibits the installation of affected parts.

Full official abstract

The FAA is superseding Airworthiness Directive (AD) 2021-25-12 and AD 2022-11-11, which applied to certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and -402 airplanes. AD 2021-25-12 required repetitive lubrications of the trailing arm of the nose landing gear (NLG). AD 2021-25-12 also required revising the existing maintenance or inspection program to include new and revised airworthiness limitations. AD 2022-11-11 required a modification to the NLG shock strut assembly. This AD continues to require the actions specified in AD 2021-25-12 and AD 2022-11-11 and requires replacement of the pivot pin and tow fitting assembly with a new, improved pivot pin and tow fitting assembly and prohibits the installation of affected parts. This AD was prompted by a determination that the pivot pin and tow fitting assembly of the NLG must be replaced. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for de Havilland DHC-8 Dash 8

  1. AD 2026-11-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-07-09
  2. AD 2026-08-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2026-06-03
  3. AD 2025-19-05 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-10-31
  4. AD 2025-05-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2025-04-16
  5. AD 2024-22-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... Effective 2024-12-31

All de Havilland DHC-8 Dash 8 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index