Airworthiness Directive

AD 2024-19-09 89 FR 84277 Active

Federal Aviation Administration · 14 CFR part 39

Requires preparing, inspecting, replacing, reconditioning the NLG wheel axle, and prohibiting affected parts.

FR document
2024-24368
Amendment
39-22851
Published
2024-10-22
Effective
2024-11-26
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2024-19-09

FR doc 2024-24368 · 89 FR 84277

AD 2024-19-09Published 2024-10-22Effective 2024-11-26

Supersedes 2016-08-08

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires preparing, inspecting, replacing, reconditioning the NLG wheel axle, and prohibiting affected parts.

Full official abstract

The FAA is superseding Airworthiness Directive (AD) 2016-08-08 for all SOCATA (type certificate now held by DAHER) Model MS 880B, MS 885, MS 892A-150, MS 892E-150, MS 893A, MS 893E, MS 894A, MS 894E, Rallye 100S, Rallye 150ST, Rallye 150T, Rallye 235C, and Rallye 235E airplanes. AD 2016-08-08 required doing repetitive detailed visual inspections of the intersection between the axle radius and the nose landing gear (NLG) fork area for chafing; doing repetitive dye penetrant inspections on the NLG wheel axle for cracks, distortion, and nicks or wear; doing corrective actions if necessary; and replacing the NLG wheel axle attachment screws with new screws. This AD is prompted by the introduction of a new inspection method and a new design for the affected NLG wheel axle that provides terminating action for the repetitive inspections, as specified in updated service information published by the manufacturer. This AD requires preparing, inspecting, replacing, reconditioning the NLG wheel axle, and prohibiting affected parts. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for SOCATA Rallye / MS 880

  1. AD 2016-08-08 Airworthiness Directives; SOCATA Airplanes Effective 2016-05-18
  2. AD 2003-06-07 Airworthiness Directives; Socata-Groupe Aerospatiale Models MS 892A-150,... Effective 2003-05-16
  3. AD 2002-05-04 Airworthiness Directives; SOCATA-Groupe AEROSPATIALE Models MS 892A-150,... Effective 2002-04-22
  4. AD 2000-22-17 Airworthiness Directives; SOCATA-Groupe AEROSPATIALE Models MS 880B, MS ... Effective 2000-12-29

All SOCATA Rallye / MS 880 directives

Applies to 1 model in our index