95-12-01
FR doc 95-13468 · 60 FR 28702AD 95-12-01Published 1995-06-02Effective 1995-07-07
Requires inspecting (one-time visual and dye penetrant) the wing forward spar fuselage attachment assembly for cracks or corrosion on certain Piper Aircraft Corporation (Piper) PA-25 series airplanes, and replacing or repairing…
Full official abstract
This amendment supersedes Airworthiness Directive (AD) 93-21- 12, which currently requires inspecting (one-time visual and dye penetrant) the wing forward spar fuselage attachment assembly for cracks or corrosion on certain Piper Aircraft Corporation (Piper) PA-25 series airplanes, and replacing or repairing any cracked or corroded part. This action requires repetitively inspecting (using ultrasonic and dye penetrant procedures) the wing forward spar fuselage attachment assembly for cracks or corrosion, replacing or repairing any cracked or corroded part, and reporting to the Federal Aviation Administration (FAA) the results of the inspections. This action is prompted by the FAA's lack of confidence in detecting internal corrosion in the wing forward spar fuselage attachment fittings while accomplishing the inspection methods required by AD 93-21-12. A report of a crack in the wing forward spar fuselage attachment assembly on an airplane where the inspection requirements of AD 93-21-12 were accomplished also prompted this action. The actions specified by this AD are intended to prevent possible in-flight separation of the wing from the airplane caused by a cracked or corroded wing forward spar fuselage attachment assembly.
