Aircraft model

Extra NG

Extra Flugzeugbau GmbH

Airworthiness Directives
1
Service Bulletins
0
Last live check
2026-08-171 of 1 re-verified
What this page is: a restatement of what the official Federal Register and manufacturer records show as of the date listed below each item. It is not a determination that any specific aircraft or engine is, or is not, in compliance. Under 14 CFR §91.403 and §91.417, the aircraft owner/operator is responsible for maintaining airworthiness and required records. Always verify against the official FAA and manufacturer sources linked below before making a maintenance or airworthiness decision.

Airworthiness Directives

1 record
AD

2026-04-12

FR doc 2026-05169 · 91 FR 12684

AD 2026-04-12Published 2026-03-17Effective 2026-04-21

Extra Aerobatic Aircraft GmbH Airplanes

Requires replacing the canopy placards and revising the Limitations Section of the Pilot Operating Handbook/Airplane Flight Manual (POH/AFM).

Full official abstract

Airworthiness Directives; Extra Aerobatic Aircraft GmbH Airplanes

The FAA is adopting a new airworthiness directive (AD) for all Extra Aerobatic Aircraft GmbH (Extra) Model EXTRA NG airplanes. This AD was prompted by reports of the canopy opening or detaching in flight because of a partially or improperly locked canopy. This AD requires replacing the canopy placards and revising the Limitations Section of the Pilot Operating Handbook/Airplane Flight Manual (POH/AFM). The FAA is issuing this AD to address the unsafe condition on these products.

Source: Federal Register document 2026-05169, retrieved 2026-08-17 · re-verified against the live Federal Register API 2026-08-17

Service Bulletins

0 records

No Service Bulletins in our index yet for this airframe. We only list SBs we have individually sourced from the manufacturer — we never invent one.

This page indexes 1 AD and 0 SBs from primary sources. The FAA may have issued additional directives for this airframe that are not yet included.

See something wrong on this page? Tell us — accuracy reports go straight to the operator.